Dodaj moj profil Prejmite številne ponudbe Identifikacija

WIA ANLAGENTECHNIK GMBH

Nemčija

Warehouse icon Distributer

Web icon
Kontaktiraj
Informacije

WIA ANLAGENTECHNIK GMBH, je podjetje tipa Distributer, ustanovljeno leta 1978, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Deluje tudi v panogah Merjenje in naravnavanje temprerature - aparati in instrumenti, Nadzor in naravnavanje - aparati in instrumenti, Signalizacija - sistemi in instalacije, Radarske in radijsko-navigacijske naprave. Sedež podjetja je v kraju Kirchseeon, Nemčija.

Druga podjetja iz iste panoge:

Spletišče

Link Variant icon Glavna stran

Domain icon Distributer

WIA ANLAGENTECHNIK GMBH

Pöringer Strasse 4C

85614 Kirchseeon - Nemčija

Kontaktiraj

Podatki o podjetju

Organizacija

  • Leto ustanovitve
    1978
  • Glavna dejavnost
    Distributer

Dejavnosti podjetja WIA ANLAGENTECHNIK GMBH

  • Merjenje in naravnavanje tlaka - aparati in instrumenti
  • Merjenje in naravnavanje temprerature - aparati in instrumenti
  • Nadzor in naravnavanje - aparati in instrumenti
  • Signalizacija - sistemi in instalacije
  • Radarske in radijsko-navigacijske naprave
Office Building Outline icon
Stran za vaše podjetje
Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.
Dodaj moje podjetje

europages vam priporoča tudi

Izbira bližnjih podjetij v dejavnosti:

PETER HIRT GMBH

Švica

Factory icon Izdelovalec/ Proizvajalec

Verified by europages badge

Peter Hirt linear ball bearings adapted to be play-free. The components of linear ball bearings, including shaft, ball cage and housing, are individually lapped and honed together in matched sets for each individual linear ball bearing. This ensures no stick-slip effect and maximum lifetime values. Peter Hirt thread gauge feelers are available from the smallest size of 0-200 (ball diameter 0.200 mm) up to size 12 (ball diameter 4.000 mm). The smallest thread gauge feeler at present, size 0-200 with a ruby ball diameter of 0.200 mm, is sized for measuring threads up to size M1.7. The thread gauge feelers are available individually or in a protective wooden box as a 12 pc, 13 pc or 14 pc set. Signal conditioning modules from Peter Hirt are specially calibrated for T-series tranducers with TESA® compatible half-bridge circuit. Modules are available with supply voltages of 5, 12 or 24 VDC and with a bipolar or unipolar output signal of ± 5 VDC, ± 10 VDC, 0-5 VDC, 0-10 VDC

PPS (PRESSURE PROFILE SYSTEMS)

Združena Kraljevina

Factory icon Izdelovalec/ Proizvajalec

Verified by europages badge

HÖNTZSCH GMBH

Nemčija

Factory icon Izdelovalec/ Proizvajalec

Verified by europages badge

MELUTEC METROLOGY GMBH

Nemčija

Office Building Outline icon Ponudnik storitev

Verified by europages badge

Our calibration laboratory is accredited according to DIN EN ISO/IEC 17025 by DAkkS (Deutschen Akkreditierungsstelle GmbH [German Accreditation Body]) for measuring the parameters of length, torque, temperature, relative humidity and scales under register number D-K-15048-01-00. As an accredited DAkkS calibration laboratory, we comply with the requirements of all national and international standards. We don't just want to satisfy our customers; we want to inspire them. Since the company was founded in 1991, we have expanded to offer a variety of services and are currently continuously developing in this sector. We have extensive experience in calibration technology. Customers in Germany and around the world benefit from our knowledge and flexibility. See Melutec Metrology for yourself and you will discover why our expertise, flexibility and innovation put us head and shoulders above the competition.

Povpraševanje po ponudbi

Ustvarite eno povpraševanje in prejmite več ponudb od preverjenih dobaviteljev.

  • Samo ustrezni dobavitelji
  • Skladno z zasebnostjo podatkov
  • 100-% brezplačno