Rezultati za

Environmental protection - Uvoz izvoz

1.120 Podjetja

0 Izdelki

BERRYSAR

Španija

BERRYSAR, je podjetje tipa Ponudnik storitev, ki deluje v panogi Mostovi in ceste - izvajalci. Deluje tudi v panogah environmental protection, civil engineering. Sedež podjetja je v kraju Barcelona, Španija.
DR. HARTMUT FRENZEL BETRIEBLICHE PRÄVENTION AUF DEN PUNKT GEBRACHT.

Nemčija

DR. HARTMUT FRENZEL BETRIEBLICHE PRÄVENTION AUF DEN PUNKT GEBRACHT., je podjetje tipa Ponudnik storitev, ki deluje v panogi Svetovanje za podjetja. Deluje tudi v panogah Säkerhet på arbetsplatsen, environmental protection, Säkerhet på arbetsplatsen, advice on processing personal data, fire prevention consultancy services. Sedež podjetja je v kraju Wuppertal, Nemčija.
HPM ENGINEERING SRL

Italija

HPM ENGINEERING SRL, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Industrijske naprave za odvajanje plinov in dima. Deluje tudi v panogah Paint booth, environmental protection, industrial suction, air exhausters. Sedež podjetja je v kraju Barberino Di Mugello, Italija.
DECON INTERNATIONAL GMBH

Nemčija

DECON INTERNATIONAL GMBH, je podjetje tipa Ponudnik storitev, ki deluje v panogi Varstvo okolja - storitve. Deluje tudi v panogah Varčevanje z energijo - svetovanje, Varčevanje z energijo - svetovanje, environmental protection, drinking water supply, Consultation on renewable energy. Sedež podjetja je v kraju Bad Homburg, Nemčija.
NATUR&ËMWELT

Luksemburg

NATUR&ËMWELT, je podjetje tipa Ponudnik storitev, ki deluje v panogi Društva za varovanje okolja. Deluje tudi v panogah Vzgojne organizacije, Vzgojne organizacije, environmental protection, nature-environment guide. Sedež podjetja je v kraju Kockelscheuer, Luksemburg.

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

WOLFTANK ADISA

Avstrija

WOLFTANK ADISA, je podjetje tipa Distributer, ki deluje v panogi Hartsbeläggningar för industrin. Deluje tudi v panogah tank lining, environmental protection, tank cleaning, epoxy resins. Sedež podjetja je v kraju Innsbruck, Avstrija.
KOZAK PHU

Poljska

KOZAK PHU, je podjetje tipa Multi-Category, ki deluje v panogi Saniranje tal. Deluje tudi v panogah Obdelava in recikliranje odpadkov, ducting systems, Obdelava in recikliranje odpadkov, industrial installation recovery, environmental protection. Sedež podjetja je v kraju Warszawa, Poljska.
CEMEBAL

Španija

CEMEBAL, je podjetje tipa Ponudnik storitev, ki deluje v panogi E-poslovanje - storitve. Deluje tudi v panogah data protection information services, e-commerce consulting, environmental protection, internet communications consulting. Sedež podjetja je v kraju Llucmajor, Španija.
HIFI WIND SPA

Italija

HIFI WIND SPA, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Eolska energija - proizvodnja. Deluje tudi v panogah Sistemi za izkoriščanje geotermalne energije, wind power generator, environmental protection, Sistemi za izkoriščanje geotermalne energije, alternative energy sources. Sedež podjetja je v kraju Salerno, Italija.
PLÁSTICOS RAMÓN NAVARRETE

Španija

PLÁSTICOS RAMÓN NAVARRETE, ki deluje v panogi Umetne mase - zbiranje in recikliranje. Deluje tudi v panogah Predelava in recikliranje odpadkov, satellite reception equipment, waste management, Predelava in recikliranje odpadkov, environmental protection. Sedež podjetja je v kraju Segorbe-Castellón, Španija.

PACK'IN BIO

Francija

PACK'IN BIO, je podjetje tipa Multi-Category, ki deluje v panogi Oblikovanje embalaže. Deluje tudi v panogah ecological surveys, environmental protection, Råmaterial. Sedež podjetja je v kraju Bordeaux, Francija.
JR AVOCAT

Francija

JR AVOCAT, je podjetje tipa Ponudnik storitev, ki deluje v panogi Pravno svetovanje. Deluje tudi v panogah town planning, environmental protection, lawyer, lawyers' office. Sedež podjetja je v kraju Toulouse, Francija.

ITC-INVESTIGAÇÃO TÉCNICA E QUIMICA

Portugalska

ITC-INVESTIGAÇÃO TÉCNICA E QUIMICA, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Kemični izdelki - uvoz-izvoz. Deluje tudi v panogah sanitisers, environmental protection. Sedež podjetja je v kraju Maia, Portugalska.
EKOLAB SP Z O.O.

Poljska

EKOLAB SP Z O.O., je podjetje tipa Multi-Category, ki deluje v panogi Varstvo okolja - stroji in oprema. Deluje tudi v panogah environmental protection, Engineering, consultancies, Geology - studies and research, environmental analysis services for atmospheric pollution. Sedež podjetja je v kraju Kobylnica, Poljska.
DRACO SOLUCIONES AMBIENTALES

Španija

DRACO SOLUCIONES AMBIENTALES, je podjetje tipa Ponudnik storitev, ki deluje v panogi Varstvo okolja - storitve. Deluje tudi v panogah Okolje - svetovanje in nadzor, environmental protection, environmental advice, Okolje - svetovanje in nadzor. Sedež podjetja je v kraju Santa Cruz De Tenerife, Španija.
GREEN LIZARD SRL

Italija

GREEN LIZARD SRL, je podjetje tipa Prodaja na drobno, ki deluje v panogi Varstvo okolja - storitve. Deluje tudi v panogah emergency unit, environmental protection. Sedež podjetja je v kraju Milano, Italija.
SHANDONG XINGHUI MECHANICAL ENGINEERING CO.,LTD.

Kitajska

SHANDONG XINGHUI MECHANICAL ENGINEERING CO.,LTD., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Industrijski objekti - koncepcija. Deluje tudi v panogah environmental protection, agricultural systems. Sedež podjetja je v kraju Zibo, Kitajska.
ECO-EXPERT

Poljska

ECO-EXPERT, je podjetje tipa Ponudnik storitev, ki deluje v panogi Varstvo okolja - storitve. Deluje tudi v panogah environmental protection. Sedež podjetja je v kraju Szczecin, Poljska.
STUDIO ELLERRE

Italija

STUDIO ELLERRE, je podjetje tipa Ponudnik storitev, ki deluje v panogi Okolje - svetovanje in nadzor. Deluje tudi v panogah environmental protection, environmental monitoring. Sedež podjetja je v kraju Porto Sant'elpidio, Italija.
CFE BUSINESS SCHOOL

Španija

CFE BUSINESS SCHOOL, ki deluje v panogi Izobraževanje za upravljanje (management). Deluje tudi v panogah environmental protection. Sedež podjetja je v kraju Madrid, Španija.

MAYR, CHR.

Nemčija

mayr® is one of the most traditional, but also most innovative German companies specialising in drive technology. From humble beginnings in 1897 to becoming the market leader for safety couplings and safety brakes that are optimised to suit the application – the company can look back at over 100 years of success. Looking to always develop better solutions and applying the company's many years of experience and expertise, mayr® now sets standards in drive technology. The broad range of mayr® products with many versions that are optimised to suit the specific market or sector includes zero-backlash shaft couplings, safety couplings, electromagnetic couplings and brakes as well as high-quality direct-current drives. These are used in a very varied range of sectors and prove themselves day after day in all areas of mechanical engineering. Certified in line with: DIN EN ISOI 9001: 2000 (quality) and DIN EN ISO 14001 (environmental protection), OHSAS 18001/OHRIS (occupational health and safety)

Spletišče
H.P. WIRTH GMBH

Nemčija

For us, certification in accordance with the DIN EN ISO 9001: 2008 quality management system is not enough. To provide you with consistently high quality, we begin by ensuring the quality of the semi-finished product and its manufacturing process, and finish with modern measuring equipment in order to make working with our products easier for you. It is not just the alloy components that are essential for a high level of process reliability in the soldering process, but specifically the surface purity of the products. We rely on qualified employees, successful quality assurance methods and the latest test systems to meet our customers' expectations and guarantee consistently high quality. We are aware of our ecological responsibility in terms of sustainability, which is why we go beyond the legal regulations for ensuring environmental protection.

Spletišče
KURZ TYPOFOL GMBH

Nemčija

Thermal transfer expertise from Germany: The KURZ Group is an international enterprise and Germany's only producer of thermal transfer film. We have been making ribbon for thermal transfer printing since 1991: Our products and services are available worldwide. At KURZ we are proud of our company's 120-year history and our considerable expertise, especially in hot stamping technology. We lead the global market in this segment thanks to our ever-expanding product range and services. The thermal transfer ribbon division benefits from this too: The group's expert technical knowledge of printing and its international connections make sure that we always stay one step ahead of the technical development game. This means your ribbons are safe, reliable, clean, and come with a host of certifications. KURZ demands top quality and places great importance on safety and environmental protection.

Spletišče
DSL AIR TECHNOLOGY GMBH & CO KG

Nemčija

A medium-sized company of more than 25 years' standing, we have made our name nationally and internationally in the fields of air filter technology, workplace safety and environmental protection on the basis of an ecological and socially responsible company philosophy. The "door within a door" design of our electrofilter series has become an international benchmark for technically sophisticated and easy-maintenance filter systems. For years, the continuous monitoring of developments in the design and performance of modern machine tools has given rise to more and more new electrofilter series, often in collaboration with the mechanical designers, and with the form adapted to the machine tool design. This also calls for a new design of the filter equipment, primarily the ionizer and collector cells. Today, DSL Air Technology boasts the world's largest electrofilter modification in the sector.

Spletišče
AFS AIRFILTER SYSTEME GMBH

Nemčija

High power – clean air. Today, when coolant pressures, cutting speeds and processing speeds in machine tools are increasing all the time, ever more aerosols are being produced, and these aerosols are becoming finer and finer. They should not – and indeed must not – be allowed to escape into the environment or the rest of the manufacturing facility without being purified. For 20 years, AFS has been one of Germany's leading manufacturers of air purifying systems and equipment for cleaning oil and emulsion mist for the metalworking industry. We offer oil and emulsion mist separating equipment – central extraction systems for oil and emulsion mist – air intake systems with heat recovery – ventilation systems – industrial environmental protection – special designs with active carbon for purifying exhaust air containing hydrocarbons. AFS is series outfitter for numerous leading machine tool manufacturers around the world, such as DMG Mori, Starrag Group, Fanuc, Stama, Kunzmann, and many more.

Spletišče
SCHNEIDER & GEMSA GMBH

Nemčija

Schneider & Gemsa offers dedicated and professional solutions for customers from the automotive, industrial, telecommunications, traffic management, medical and electronic equipment sectors. Our manufacturing capabilities range from one-off and assembly-based manufacture to the complete manufacture of terminal devices and complete system solutions. We move and operate complete "business areas" – fully and semi-automatic production lines in affordable locations. Our sites in Germany, Czechia and Moldova enable us to offer cost-optimised solutions and services. Schneider & Gemsa has many decades of expertise in cable assembly, mechanics, mechatronics, electronic equipment, sensors and actuators. Since the company's foundation, we have produced several million electric adjusting motors, mechanical and electrotechnical assemblies and end devices. Our cable assembly produces strands as well as data, sensor and control cables, wiring harnesses and control cabinets with innovative technologies using the latest machinery and tools. Our own equipment workshop manufactures individual assembly, manufacture and inspection equipment. We consider quality, environmental protection and the conservation of resources to be essential aspects of our activities. Our company complies with the standards DIN EN ISO 9001: 2015, IATF 16949: 2016 (automotive) and DIN EN ISO 14001: 2009 (environment) at all sites.

Spletišče
TIPP OIL MANUFACTURER LTD. CO. KG

Nemčija

SPECIALIST IN LUBRICANTS – Made in Germany quality. Lubricants reduce friction, ensuring that force produces maximum motion. They help ensure that vehicle engines, equipment and machines enjoy a long service life. With a wide range of products, we provide you with comprehensive solutions for lubrication requirements and unconditional reliability. Our mission is to provide innovative lubricant solutions for a sustainable future and to keep the world moving. Even after our lubricants have been applied, we provide a first-rate service: for empty plastic Tipp oil containers from 1 L to 20 L, use our “Rebottle” deposit system. We think organic, we clean organic, … with effective micro-organsims – think Green! Our new, sustainable range of organic cleaning products uses effective micro-organisms for professional applications. Our goal is to provide an integrated cleaning concept and ensure sustainable interaction with the environment. Thanks to our solutions, the use of traditional cleaning agents is reduced to an absolutes minimum, thereby making an active contribution to water pollution control and environmental protection! The use of effective micro-organisms, without the addition of any artificial or chemical substances. The philosophy of Tipp oil organic preparations is based entirely on the use of cleaning processes as they occur in nature.

Spletišče
MARTINREA HONSEL GERMANY GMBH

Nemčija

Martinrea Honsel is a leading global supplier of light metal products, primarily for the automotive industry. The company produces aluminium components for the engine, transmission, chassis and body of cars and commercial vehicles, as well as for mechanical engineering and other applications using all common casting and rolling production processes. Components from the company reduce vehicle weight, fuel consumption and emissions, and make a significant contribution to environmental protection. Today, Martinrea Honsel employs around 4100 people in 13 plants across five countries. The rolling mill in Meschede is known worldwide as a supplier of aluminium surfaces in the area of bright and anodised materials as well as aluminium plates and rounds. The products are used in exterior components and interior fittings for cars and commercial vehicles, as well as in machine and plant construction, decorative front panels for furniture, suitcases, reflectors for lights, cosmetics packaging and much more. As a niche and specialist producer of high-quality semi-finished rolled products and stamped blanks, the development expertise practised with customers over many years is one of the company's strengths. Within the scope of product development, individual solutions are developed together with the customer, e.g. special material properties, special dimensional accuracy and customer-specific surface requirements for series application. If you have any questions, please feel free to contact us at any time.

Spletišče
NEWSUN PV TECHNOLOGY CO.,LTD

Kitajska

NEWSUN PV TECHNOLOGY CO., LTD (NSPV) integrates design, development, production, sales as the modern management of enterprises. Product line includes PV solar system(connector, solar BIPV junction box, PV cable, installation accessories, controller, distribution box & combiner box, etc.); Protection system(earth-fault protection, diode connector, solar inline fuse connector, circuit breaker, etc.) and system optimization, which are mostly meet the standards of TUV, ETL, CE.Products cover the fields of PV system application, solar street light, solar hybrid street lighting and others, and Energy Performance Contracting (EPC). Solar energy has a great potential as a zero emission, zero consumption, and clean, safe, environmentally friendly, renewable energy. NSPV strives to make contribution to energy saving, low carbon emission, environmental protection, continuously pushes forward to the development of green renewable energy. We aim at quality, innovation, faithfulness, cooperation, mutual benefit and social accountability. Our eternal principle is to provide the superior, economic, safe, reliable technology and competitive products. We make every effort to “Green Energy” and “World Environment “and dedicate to create a better future for human beings.

Spletišče
MONOMERO INDÚSTRIA DE PLÁSTICOS LDA

Portugalska

Monómero started the activity in 2001 to transform Plastic raw materials into all kinds of packaging products. We have the most advanced equipment to make the best possible product to fulfill the needs of our customers. On the technical side, we have Co-extrusion equipment, high-quality printing press 8 colors, solvent-less lamination, and the most advanced bag-making machines to produce controlled atmosphere products (MAP), BIO Degradable BAGS, and much more. We also aim to produce thermoplastic flexible films and packaging, especially for primary uses, especially in the food sector. In addition, we have the best-qualified persons we can get on the human side. Our main goal is to work side by side with our customers, find the best possible solution for their packaging needs, and find and develop new products. Our Company stands for environmental protection and to achieve this goal. For example, we do our recycling indoors to ensure that every single plastic waste from our production is given a second life in our production process. Also, we stand for innovation; we are always open to new ideas. We also have our concerns with social matters. That's why we support the local community in issues that go from local parties to child sports. Please do not hesitate to contact us for more information!

Spletišče