Rezultati za

Fibreglass-reinforced plastic - Uvoz izvoz

25 Podjetja

0 Izdelki

SOLIDIAN GMBH

Nemčija

As a leading specialist, solidian develops and products non-metallic reinforcements made from carbon glass or basalt fibres. The reinforcements are available in bar or mesh form. The fields of application for our reinforcement solutions range from facade panels through bridge construction and maritime construction to restorations. If necessary, solidian supports you at every stage of your projects, from application consulting through the calculation of reinforcements to assistance on the building site. In our in-house test laboratory, we also determine the necessary parameters for you individual building projects. With a team of 270 employees spread across two sites, we develop practical solutions for our customers for the buildings and structures of tomorrow.

Spletišče
USNER CHEMICALS

Avstrija

As a family-managed business, we have been offering chemical-technical consultancy and the trade of thermoset materials, silicone elastomers and chemical specialties for plastic-processing companies, as well as products for the casting industry, since 1949. As a producer of binding agents based on furan/phenolic and alkyd resin as well as the corresponding hardeners for cast steel, we have been supplying the casting industry ever since our company was founded. As an exclusive representative of well-known producers in the composite industry, we deal in a wide range of chemical specialties for use in the most varied areas of application – including: • Epoxy and polyester resin systems • Epoxy prepregs • Liquid silicone rubber • Adhesives • Halogen-free flame retardants • Graphene • Reinforcement materials (glass rovings, mats, fabrics). • We also offer room-temperature-curing and liquid silicones for use in sealants and moulding compounds, and for applications in medical technology, health care and the electrical industry (liquid silicone rubber). Collaboration with our partner companies in particular allows us to be in dialogue with important and innovative plastic-processing companies, and to work together on new developments and projects. We supply both the basic raw materials and special additives, which we optimise together with our suppliers and customers so that they're customised depending on the application.

Spletišče
STW KAUTZMANN GMBH

Nemčija

With its workforce of over 90 people, family company Schwarzwälder Textil-Werke Heinrich Kautzmann GmbH (STW) develops and produces top quality fibres for your industry and applications. As a leading specialist in the production of fibre fillers, shortcut fibres, fibrids & pulp as well as customised solutions, we also process all the fibre materials you need; from natural and synthetic fibres through to high-tech fibres. Thanks to decades of experience, continuous research and a strong customer focus, we are able to stay flexible and react to new requirements with our bespoke fibre solutions. And since we operate in over 70 countries, you will always find a competent fibre expert in your vicinity.

Spletišče
M.M. GRIGLIATI

Italija

M.M. has been operating in the FRP (fibreglass reinforced plastic) sector for 40 years, manufacturing high-quality gratings, profiles and composite structures. FRP's intrinsic properties (e.g. corrosion resistant, non-magnetic, electrical insulation and no maintenance) make it highly versatile. ISO 9001: 2015 Bureau Veritas certification.

Spletišče
P.J. PRAUSE DUROTEC GMBH

Nemčija

In 1974, Paul Joachim Prause founded the company Schichtstofftechnik Prause, which was renamed the P. J. Prause Durotec GmbH in 1998. P. J. Prause had previously, as part of 3M Germany, significantly contributed to shaping the technical application of synthetic leaf springs in Germany with Scotchply™ glass-fibre composites. This enabled Prause Durotec GmbH to acquire more than 35 years of experience in the manufacture and application of leaf springs made from fibre composites. Prause Durotec is a medium-sized company with 16 members of staff and a global customer base. The range of products we manufacture includes all configurations of flat leaf springs with E-glass, S-glass, carbon fibres, with epoxy resin providing the matrix. The procedures used to process the UD prepregs (UD = unidirectional) comply with aeronautical and military standards.

Spletišče

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

TECHNO-COMPOSITES DOMINE GMBH

Nemčija

Do you need special, ready-to-install products made of fibre-reinforced plastics? Then we should get in touch. Creative solutions with fibre composite components/Ready-to-install GRP/CRP/Tailored/Series products and unique items. We are your system supplier for high-quality fibre composite components. Don't try just to replace your steel component with GRP. Make the most of our expertise in [consulting and planning] to develop the right and cost-effective components. Specialists work in-house at our company with a great deal of practical experience in their [designs]. This is how an idea is turned into a system component. [Production] We produce your components. Ready to install. CNC machinery, dust extraction, adhesive bonding experts, quality assurance. We'll do that for you. Simply contact us. DIN 6701-A1 | DIN 2304-S1 | DIN EN ISO 9001: 2015 | IRIS certification | ISO/TS 22163 Founded 1994 | 50 qualified employees | 4800 m² production and warehouse area | CNC machinery

Spletišče
UK WATER TAXI

Združena Kraljevina

UK WATER TAXI, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Prevoz - čolni. Deluje tudi v panogah boats made of fibreglass-reinforced plastic, fibreglass for boats, boats. Sedež podjetja je v kraju Stockport, Združena Kraljevina.
NUOVA ARTEC

Italija

NUOVA ARTEC, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Smole. Deluje tudi v panogah glassfibre, scenery consulting, fibreglass-reinforced plastic statue. Sedež podjetja je v kraju Terrossa Di Roncà, Italija.
DISCOUNTEA

Francija

DISCOUNTEA, je podjetje tipa Distributer, ki deluje v panogi Stanovanjska oprema - dodatki in okrasni predmeti. Deluje tudi v panogah furnishing shop preparation, fibreglass-reinforced plastic statue. Sedež podjetja je v kraju Marcq-En-Baroeul, Francija.
CENGIZ TEKNIK KOMPOZIT SAN VE TIC AS

Turčija

CENGIZ TEKNIK KOMPOZIT SAN VE TIC AS, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Gradbeni materiali. Deluje tudi v panogah urban furnishings, LED Street Light, manholes, boxes in plastic reinforced by fibreglass. Sedež podjetja je v kraju Istanbul, Turčija.

BULK S.R.L.

Italija

BULK S.R.L., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Industrijska izdelava pip. Deluje tudi v panogah needle valves, high pressure fittings, compression joints, boxes in plastic reinforced by fibreglass. Sedež podjetja je v kraju Cormano, Italija.
CARONTE STUDIOS S.R.L.

Italija

CARONTE STUDIOS S.R.L., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Poustvarjalna umetnost - ustvarjanje in distribucija. Deluje tudi v panogah fibreglass-reinforced plastic statue. Sedež podjetja je v kraju Caivano, Italija.

KRUZYACHT,LTD

Ukraijna

KRUZYACHT,LTD, ki deluje v panogi Ladjedelnice - gradnja. Deluje tudi v panogah boats made of fibreglass-reinforced plastic, yachts. Sedež podjetja je v kraju Kherson,, Ukraijna.
TIESSE DI SANTUS ANGELO

Italija

TIESSE DI SANTUS ANGELO, je podjetje tipa Prodaja na drobno, ki deluje v panogi Pohištvo in dekoracije, za vrt. Deluje tudi v panogah fibreglass-reinforced plastic statue, manufacturer of statues and sculptures. Sedež podjetja je v kraju Zelo Buon Persico, Italija.
FIBROLUX GMBH

Nemčija

Manufacturer of GFK profiles and gratings. Our fibreglass profiles are produced in accordance with EN 13706. Our plastic gratings are made according to DIN 24537-3. Standard profiles are available from stock. Customer-specific profiles created using our in-house machine tools with quick turnarounds. We support our customers with product selection and optimisation from the tender phase onwards. Prototypes with 3D printing technology. Calculating and designing constructions. Advice on replacing conventional materials and constructions with GFRP solutions. Product range: Standard profiles, such as round pipes, square pipes, rectangular pipes, brackets, flat profiles, I profiles, H profiles, Z profiles, hat profiles, C profiles, U profiles, bars, corner profiles, dogbones. Custom profiles to order. Gratings, safety flooring, treads, rebars, reinforcement, threaded rods, nuts, plates, corrugated slabs, square guide way, ladder rungs, sandwich profiles, cable trays, cable ducts, consoles. Flammability properties – DIN4102, UL94V, CEN/TS 45545, NFF16-101, BS 476, EN 13501, DIN 5510.

Spletišče
TECHNOFORM KUNSTSTOFFPROFILE GMBH

Nemčija

For years, Technoform has been among the world's most acclaimed suppliers in the plastic extrusion industry. The specialist company develops and produces complex extruded profiles for technical industrial applications, especially in the energy, automotive, aviation and construction sectors. Today, some metal components are already being replaced with Technoform products in these sectors. Our customers particularly value TKP's expertise in solution-oriented development with which the company faces each new task. High precision (± 0.05 mm), very smooth surfaces and perfectly sharp outlines, as well as our ability to highly precisely manufacture internally calibrated hollow profiles, expand the range of applications of our products. Our fast processes and exemplary quality of our end products set us apart from the competition.

Spletišče
DIGEL STICKTECH GMBH U. CO KG

Nemčija

DIGEL STICKTECH GMBH U. CO KG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Optična vlakna. Deluje tudi v panogah Radiant heaters, Heating elements, Heating foils, heating mat, Carbon-fibre-reinforced plastics (CFRP), Floor heating pads, Electrical heating bands, Electric heat cushions, Electric blankets. Sedež podjetja je v kraju Pfullingen, Nemčija.
TFP TECHNOLOGY GMBH

Nemčija

TFP TECHNOLOGY GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Tehnični tekstil. Deluje tudi v panogah Scrims made of technical fibres, Carbon-fibre reinforced plastic semi-finished products, Preforms, textile, Semi-finished products from fibre composites, Carbon-fibre-reinforced plastics (CFRP), Products made from fibre composite materials, Fibermaterial, Carbon fibre components, Sensors, intelligent. Sedež podjetja je v kraju Falkenstein, Nemčija.
MPI EUROPE GMBH

Nemčija

MPI EUROPE GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vbrizgavanje gume in umetnih mas. Deluje tudi v panogah Molded plastic parts, Plastic injection-moulded parts for the automotive industry, Plastic injection-moulded parts for medical technology, Plastic injection-moulded parts for small batches, Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Injection-moulded parts, technical, Plastic moulded parts, reinforced with glass fibre, Plastic components for medical technology. Sedež podjetja je v kraju Doebeln, Nemčija.
VIDROPOL - ESTRATIFICADOS DE FIBRA DE VIDRO, S.A.

Portugalska

VIDROPOL - ESTRATIFICADOS DE FIBRA DE VIDRO, S.A., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Toplotna izolacija - materiali. Deluje tudi v panogah Steklena vlakna in volna, Steklena vlakna in volna, glass-fibre filled, reinforced fibreglass, fibreglass containers. Sedež podjetja je v kraju Avioso Santa Maria, Portugalska.

BROADWATER MOULDINGS LTD

Združena Kraljevina

BROADWATER MOULDINGS LTD, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Plastgjutning. Deluje tudi v panogah Glass fibre reinforced plastic sections, fibreglass product moulding, fibreglass products. Sedež podjetja je v kraju Beccles, Združena Kraljevina.
DANYANG RUIBU GLASS FIBRE CO., LTD.

Kitajska

DANYANG RUIBU GLASS FIBRE CO., LTD., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Steklena vlakna in volna. Deluje tudi v panogah fibreglass fabrics, fibreglass-reinforced self-adhesive tapes. Sedež podjetja je v kraju Danyang, Kitajska.
PLASTIC 77

Italija
PLASTIC METAL S.P.A.

Italija

PLASTIC METAL S.P.A., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vbrizgavanje umetnih mas - stroji. Deluje tudi v panogah Vbrizgavanje gume in umetnih mas, Ojačane umetne snovi - izvedba, Vbrizgavanje gume in umetnih mas, Ojačane umetne snovi - izvedba. Sedež podjetja je v kraju Gambellara, Italija.
PLASTIC-SOLUTIONS

Danska

PLASTIC-SOLUTIONS, je podjetje tipa Distributer, ki deluje v panogi Merilni in kontrolni instrumenti. Deluje tudi v panogah fibreglass products, drinking water tanks, Flow meter, plastic tanks. Sedež podjetja je v kraju Horsens, Danska.

Poiščite ponudbe za

Filtri

Rezultati za

Fibreglass-reinforced plastic - Uvoz izvoz

Število rezultatov

25 Podjetja