Rezultati za

Izdelovalec Proizvajalec - Foam moulding

18 Podjetja

0 Izdelki

ALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH

Nemčija

Our patented casting resin system, ALWA MOULD D, is the fastest curing casting resin system in the world. It is very easy to process and does not need to be post-tempered. Our easy to use system has a pot life of only 20 minutes! Deep drawing can take place immediately after demoulding. From 1 to 2500 kg, everything from large bathtubs to small chocolate moulds can be cast. Commercial vehicle manufacturer Aixam has been successfully working with our system for years. With our innovative ALWA POR porous plates, the time-consuming drilling of vacuum holes is no longer necessary. They impress with high stability, compressive strength and a permanent temperature resistance of over 190 °C. ALWA POR is suitable for vacuum deep drawing and forming processes as well as aeration for aquariums, fish ponds and sewage treatment plants, ventilation of injection and blow moulds, all processes with hot air and steam, vacuum clamping technology, filter applications, air film sliding technology, foundry, etc.

Spletišče
ITA MOULDING PROCESS

Francija

ITA MOULDING PROCESS, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Kalupi, precizni. Deluje tudi v panogah moulded multi-plywood, Foam moulding. Sedež podjetja je v kraju Séverac-Le-Château, Francija.
CELSO

Francija

CELSO, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Pene iz gume in umetne mase. Deluje tudi v panogah Pene iz gume, Aeronavtika - oprema, Pene iz gume, Aeronavtika - oprema, Foam moulding. Sedež podjetja je v kraju Bressols, Francija.
MAPUR

Italija

MAPUR, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Pene iz gume in umetne mase. Deluje tudi v panogah Foam moulding, car components. Sedež podjetja je v kraju Leini, Italija.
ESPUMAS DEL VALLES

Španija

ESPUMAS DEL VALLES, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Pene iz umetne mase. Deluje tudi v panogah foam for furnishings, polyurethane for soft foam, Foam moulding, Foam flame treatment. Sedež podjetja je v kraju Polinyà, Španija.

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

PRO 2 PRO LTD

Združena Kraljevina

PRO 2 PRO LTD, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Plastgjutning. Deluje tudi v panogah injection moulding of plastics, fibreglass product moulding, Foam moulding. Sedež podjetja je v kraju Telford, Združena Kraljevina.
TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Nemčija

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Spletišče
CHEM-TREND (DEUTSCHLAND) GMBH

Nemčija

Chem-Trend is the most proven partner in the world for release agents, purging compounds, and other related process chemical specialties. Using a customer-centric approach combined with deep research and development, Chem-Trend is dedicated to providing expertise and innovative solutions to improve product quality, production efficiency, waste reduction, and sustainability for its customers now and well into the future. Chem-Trend offers a globally integrated network of experienced, knowledgeable, and insightful production and technical experts, with leading-edge research and development facilities supporting myriad industries and needs. Chem-Trend serves customers through offices in North America, South America, Asia, and Europe and is part of the Freudenberg Group. We are specialised on the development, manufacturing and marketing of: Mould Release Agents Purge Compounds Mould Maintenance Products (Cleaners and Degreasers, Lubricantes, Mould Protectants, Anti-Corrosion Agents) Hydraulic Fluids Plunger Lubricants Moulding of composites Die casting Friction Moulding of Polyurethane (PU Foam) Moulding of Rubber Moulding of Thermoplastics Tyre Paints (Release Agents) for Tyre Manufacturing Tyre Paints (Release Agents) for Tyre Retreading Mould Maintenance Release Agents for Wood-Composites

Spletišče
W. DIMER GMBH

Nemčija

W. Dimer GmbH is an innovative medium-sized company with over 80 years' experience in the processing of cellulose wadding and foam processing. As a recognised partner among our clients, we develop and produce tailor-made product and packaging solutions made from cellulose wadding/tissue, PUR foams, PE foams, cross-linked PE foams, PA foams and cellular rubber. In addition, we manufacture compound foams, compound foam moulded parts, dental serviettes and absorbent pads for foodstuffs. As a cellulose wadding and foam specialist, we work for customers in a wide variety of industries. These include companies in the pharmaceutical sector, the food industry, medicine and medical engineering, mechanical engineering and tool manufacturing, the automotive industry, electronics industry, filtration technology, transport protection and the furniture industry. Our products are certified in accordance with ISO 9001 (quality management), ISO 14001 (environmental management) and ISO 15593 (food packaging and hygiene management).

Spletišče
KCD KUNSTSTOFFE, ADDITIVE UND BERATUNG GMBH

Nemčija

kcd GmbH develops and manufactures additives for thermoplastic materials. We offer complete solutions for a range of typical applications in the fields of chemical blowing agents, microsphere masterbatches, lubricants, demoulding aids, UV stabilisation and more besides. As well as standard additive products, we also produce custom orders for specialist requirements and new projects. Get in touch to tell us about your specific needs.

Spletišče

SPANSET SECUTEX GMBH

Nemčija

SpanSet secutex Sicherheitstechnik GmbH was founded in 1982 by Heinz Franke and SpanSet GmbH. secutex, which stands for "secure textile", has become one of the largest manufacturers and processors of polyurethane over the years. The range of products, which initially consisted of polyurethane-coated lifting straps and protective sleeves, covers various areas, for example technical moulded parts for mechanical engineering, roller and roll coating, prong and surface protection. secutex is a highly wear-resistant polyurethane, which was developed for lifting components with sharp edges, for example coils. By constructing our own moulds, we can provide individual solutions and designs. Thanks to continually developing new solutions for coil handling and storage, secutex has nearly become the industry standard both in Germany and internationally. All products are manufactured in Germany and sold either directly or through an international dealer network

Spletišče
TOGNO PLASTICS SNC

Italija

TOGNO PLASTICS SNC, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Pipe za sanitarije. Deluje tudi v panogah Kalupi, plastična in gumarska industrija, Vbrizgavanje gume in umetnih mas, moulding of plastic materials, tap accessories, semi-foam plastic moulding, Kalupi, plastična in gumarska industrija, ABS chrome plating, moulds for plastic materials, Vbrizgavanje gume in umetnih mas. Sedež podjetja je v kraju Omegna, Italija.

STUDIO SERVICE S.A.S.

Italija

STUDIO SERVICE S.A.S., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Plastförädling. Deluje tudi v panogah working polystyrene, packing articles, polystyrene foam moulding, polystyrene foam packaging materials. Sedež podjetja je v kraju Aprilia, Italija.
FH ZAJKOWSKA

Poljska

FH ZAJKOWSKA, je podjetje tipa Multi-Category, ki deluje v panogi Gradbeni materiali. Deluje tudi v panogah Strešna kritina v balah, Pločevina in cevi, Strešna kritina v balah, rods for concrete, polystyrene foam moulding, Pločevina in cevi. Sedež podjetja je v kraju Białystok, Poljska.
SHANGHAI INTCO INDUSTRIES CO., LTD.

Kitajska

SHANGHAI INTCO INDUSTRIES CO., LTD., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Stiropor. Deluje tudi v panogah polystyrene foam moulding, polystyrene. Sedež podjetja je v kraju Shanghai, Kitajska.
W.AG FUNKTION+DESIGN GMBH

Nemčija

W.AG Funktion + Design GmbH, based in Geisa, Germany, was founded in 1992 and currently has 180 employees. Bertram Göb is the managing director. W.AG started out initially as a supplier of technical injection moulding components, but soon went on to develop its own range of cases and containers. The company's major breakthrough happened in 1997 with the TEKNO plastic case. Building on this success, W.AG developed numerous other case, box and containers series in the following years, such as the small product packaging SWING, the heavy-duty case HEAVY, the JAZZ model range, the slim plastic case BEAT and the highly functional design case TWIST. Alongside developing cases and boxes and continuously expanding into injection moulding and tool manufacturing, the company built up competencies in areas of foam processing and printing technology.

Spletišče
ZAPP-ZIMMERMANN GMBH

Nemčija

ZAPP-ZIMMERMANN has worked for more than 25 years to offer its customers innovative fire protection systems specific to the areas of cable, pipe and combination partitioning and fire protection joint sealants. Alongside our tried-and-tested range of intumescent moulded parts made from polyurethane fire protection foam, we offer other materials such as silicon and acrylic for structural engineering, tunnel construction, shipbuilding and rail vehicles. Our wide range of fire protection systems includes the correct product for any application, all enabling practical installation and retrofitting. Our systems can be processed quickly and easily without using special tools and the moulded parts can be reused, making them ideal for any stage in the life of your building, regardless of whether they are intended for temporary or permanent use. Our systems are completely free from dust and fibres, making them usable in all areas of construction. You too can benefit from our years of experience and our expertise with structural fire protection.

Spletišče
ALEMO D.O.O.

Slovenija

ALEMO is a dynamic company and a global leader in developing and manufacturing foam extruders and other converting equipment for Polyethylene (EPE), Polypropylene (EPP) and Polystyrene (XPS) foam production. Our extrusion lines with twin screw and 4.0 technology, produce same foam strength and quality at lower density. Best product uniformity in sheet thickness and density. Alemo’s conversion machines portfolio stands out with the following products. In-line automatic coreless (re)winder, Cutting and bag making machine/pouch/sheeting machine. Cutting and corner making machine/profile sealer and plank lamination line/bonding machine. Alemo also supplies XPS extrusion line for XPS decorative profile production (cornice/skirting/ceiling moulding). Along with the best energy saving extruders available on the market, you may choose multiple downstream options, as for example: in-line trimming and longitudinal cutting, in-line pre-cutting, automatic hotmelt gluing of cores, in-line perforation. Fast die-changing system (without extruder stop), in-line pipe/profile embossing & coating system. Moreover in-line tape/liner application unit, transversal cutting unit, in-line pipe coating unit. In-line hotmelt and strip application unit and more. We do supply also technology for extrusion of Polyethylene foam Cap liners, Polyethylene (PE) foam gaskets and seals.

Poiščite ponudbe za

Filtri

Rezultati za

Izdelovalec Proizvajalec - Foam moulding

Število rezultatov

18 Podjetja