Rezultati za

Izdelovalec Proizvajalec - Surface treatment systems

253 Podjetja

2 Izdelki

AURION ANLAGENTECHNIK GMBH

Nemčija

AURION Anlagentechnik GmbH – plasma technology = plasma systems + high frequency components. AURION Anlagentechnik GmbH was founded by three entrepreneurs towards the end of 1996. The idea which led to this was to produce efficient, low-cost and environmentally friendly components and complete systems for surface treatment. AURION develops and constructs components which supply power to plasma systems. This includes impedance adaptation networks with automatic tuning as well as filters, switches, phase shifters, power splitters, lines and connectors. The main focus is in the field of high-frequency plasma processes at 13.56–27.12 MHz. Building on our expertise in component manufacturing, AURION also offers complete systems for plasma-enhanced surface treatment. This includes surface cleaning and modification as well as coating and etching processes (PVD, PECVD, RIE, microwave).

Spletišče
TIGRES GMBH

Nemčija

TIGRES GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Stroji za končno obdelavo površin. Deluje tudi v panogah Pregled površin, Corona surface treatment equipment, Mellanfrekvensgeneratorer, Surface treatment with corona systems, Surface pretreatment systems, Plasma, atmospheric, Plasma treatment systems, Plasma coating, Plasmageneratorer. Sedež podjetja je v kraju Marschacht, Nemčija.
VENJAKOB MASCHINENBAU GMBH & CO KG

Nemčija

VENJAKOB MASCHINENBAU GMBH & CO KG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Površinska obdelava kovin - stroji in oprema. Deluje tudi v panogah Roboti za barvanje, Continuous flow cleaning systems, Paint shops and drying systems, Continuous painting systems, Glass finishing, spray techniques, Roboti za barvanje, continuous-flow dryers, Cleaning systems. Sedež podjetja je v kraju Rheda-Wiedenbrück, Nemčija.
ATAN SURFACE TECHNOLOGY

Avstrija

ATAN SURFACE TECHNOLOGY, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Popravilo industrijskih oprem. Deluje tudi v panogah surface treatment systems, metal surface finishing - machinery. Sedež podjetja je v kraju Pöttsching, Avstrija.
MKV METALL- UND KUNSTSTOFFVERARBEITUNG GMBH

Nemčija

MKV METALL- UND KUNSTSTOFFVERARBEITUNG GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Površinska obdelava kovin - stroji in oprema. Deluje tudi v panogah Galvanska obdelava - stroji, Galvanska obdelava - stroji, surface treatment systems, Automatisation of special machines, galvanising systems. Sedež podjetja je v kraju Allersberg, Nemčija.

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

PACK'AÉRO

Francija

PACK'AÉRO, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Precisionsmekanik. Deluje tudi v panogah precision mechanical workshop, mechatronics engineering, surface treatment systems. Sedež podjetja je v kraju Saint-Cloud, Francija.
ACXYS TECHNOLOGIES

Francija

ACXYS TECHNOLOGIES, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Robotika. Deluje tudi v panogah surface treatment systems, plasma treatment. Sedež podjetja je v kraju St Martin Le Vinoux, Francija.
FISCHER GMBH & CO. SURFACE TECHNOLOGIES KG

Nemčija

FISCHER GMBH & CO. SURFACE TECHNOLOGIES KG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Galvanska obdelava - stroji. Deluje tudi v panogah Vbrizgavanje gume in umetnih mas, galvanising systems, Vbrizgavanje gume in umetnih mas, surface treatment systems, tool manufacturing. Sedež podjetja je v kraju Katzenelnbogen, Nemčija.
JOKE TECHNOLOGY GMBH

Nemčija

JOKE TECHNOLOGY GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Stroji za končno obdelavo površin. Deluje tudi v panogah surface treatment systems. Sedež podjetja je v kraju Bergisch Gladbach, Nemčija.
POLY VISION

Belgija

ME.RO. SPA

Italija

Me.Ro. makes surface treatment systems (corona treatment, plasma treatment) and induction sealing systems (cap sealing). The plasma treatment system is used to make plastic film suited to printing and laminating processes. For certain materials, the plasma treatment system provides advantages over corona treatment. The cap sealing system is used in the bottling industry to seal recipients after filling.

Spletišče
QUELLTECH GMBH

Nemčija

QuellTech turnkey solutions for industrial image processing In addition to the laser sensor technology, our complete solutions include application software that can be implemented remotely worldwide. Why QuellTech laser sensors? Due to our flexible production methods and our focus on laser triangulation, we can adapt our sensors at any time. This includes, for example: Limited installation space, high process speeds, high temperatures of the measurement objects (up to approx. 1200°C), optically demanding surfaces and harsh industrial environments. Inline quality monitoring in production, machines and systems with laser sensor technology for surface inspection, volume measurement, preventive maintenance, flatness measurements, thickness measurements, weld seam guidance, weld seam inspection, industrial image processing and 3D laser scanner measurements. Quelltech offers inline solutions for quality inspection in the following industries Metal Fabrication, Smartphone Manufacturing, Welding Automation, OEM Integration, Power Engineering, Mining, Automotive. Do you need an initial consultation for your measurement task and preferably an initial free estimate of the feasibility of your measurement task? Then please get in touch with us at office@quelltech.de We will call you back promptly or arrange a team meeting with you for a competent initial technical evaluation of your measurement task.

Spletišče

LUDWIG SCHLEICHER ANLAGENBAU GMBH & CO. KG

Nemčija

We have developed and produced machines and systems, and process engineering in connection with automation and robotics, including the entire electrical engineering planning – hardware and software, for more than 30 years. Modular concepts for manufacturing and processing products made of carbon, plastic, composite materials, recycled materials, aluminium and steel, primarily for high-quality interior and exterior parts in the automotive and aviation industries. As a medium-sized company, we have consolidated our expertise into a solid structure through Ludwig Schleicher Anlagenbau GmbH & Co. KG, and Ludwig Schleicher Ingenium GmbH & Co.KG. Our customers worldwide receive the best possible assistance through innovative process engineering advice, reliable completion of tasks, as well as support and service offers throughout the entire product life-cycle, according to the premise: "Everything from a single source – one partner".

Spletišče
ARCOTEC GMBH

Nemčija

With almost 50 years’ experience, Arcotec GmbH enjoys success as the sole manufacturer of all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). 2019 - With over 45 years’ experience, Arcotec GmbH continues to enjoy success as the sole manufacturer all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). Over 15, 000 Arcotec pretreatment systems in use worldwide are a testimony to our consistently high quality and unique know-how in the field of surface pretreatment. 1997 - Introduction of the atmospheric plasma machine (Arcospot®), which distributes high-energy spark discharges. The introduction of the atmospheric plasma machines in particular opened up the market for materials that are difficult to treat at high feed rates. 1991 - Another physical treatment principle, “flame treatment”, was introduced. 1985 - Arcotec GmbH was founded. Pretreatment systems 1976 - Development and deployment of the world’s first plasma machine with open jet electrodes (Arcojet®) for treating plastic moulded parts; this works with electric plasma. Pretreatment systems 1975 - Production of the pretreatment machines begins using high-frequency corona. Pretreatment systems 1974 - Fritz Bloss founded an independent commercial agency.

Spletišče
ELT ENTSTAUBUNGS- UND LUFTTECHNIK GMBH

Nemčija

Our aim is not only to identify each individual technical task but also to work towards comprehensive solutions while keeping cost-effectiveness, amortisation, safety and environmental sustainability in focus. The benefit for you is our speed. ELT was founded in 1996 by two engineers whose experience is based on 30 years of working in the ventilation and dust removal technology sector. Thanks to our flexibility and technical expertise, we have been able to construct installations in a variety of sizes both in Germany and abroad. Our strength lies in the cohesion of our company with close collaboration between customer consultation, detailed planning, preparation and professional installation.

Spletišče
ABRAWHEEL S.R.L.

Italija

Abrawheel S.r.l. is a leading company producing abrasive discs, abrasive paste and metal cleaning equipment. Thanks to years of experience in this sector we can assure that our customers are supplied with the best products on the market both in Italy and abroad. We strive to a give custom solutions to each and every customer. Rely on us for high quality products and efficient service that meet all your company's requirements.

Spletišče
SFA ENVIRO

Francija

SFA ENVIRO, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Priprava vode (industrijska) - naprave in oprema. Deluje tudi v panogah treatment of industrial and municipal wastewater, equipment for sewage treatment plants, retention basin, Behandling av gråvatten och avloppsvatten, wastewater treatment equipment, effluent treatment:, wastewater effluent treatment, fine-bubble diffuser, wastewater purification. Sedež podjetja je v kraju Paris, Francija.
BOUS RENZMANN CLEANTECH GMBH

Nemčija

BOUS RENZMANN CLEANTECH GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Industrijski čistilni stroji in oprema. Deluje tudi v panogah high pressure washes, Continuous flow cleaning systems, Conveyor belt cleaning systems, Systems for precision cleaning, Cleaning machines, Pipe washing systems, Spray wash systems, Immersion cleaning systems, Ultrasonic cleaning systems. Sedež podjetja je v kraju Köln, Nemčija.
WOMA GMBH

Nemčija

WOMA GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Čiščenje rezervoarjev in cistern. Deluje tudi v panogah Machinery and systems for descaling, high-pressure pumps, Paint removal systems, High-pressure water jet cleaning equipment, Cleaning systems for pipes, Machinery and systems for high-pressure water jet cleaning, High-pressure water-jet deburring, High-pressure cleaning equipment, Tank cleaning equipment. Sedež podjetja je v kraju Duisburg, Nemčija.
RIPPERT ANLAGENTECHNIK GMBH & CO. KG

Nemčija

RIPPERT ANLAGENTECHNIK GMBH & CO. KG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Površinska obdelava kovin - stroji in oprema. Deluje tudi v panogah Metalurgija - stroji in naprave, systems and machinery for metal surface treatments and finishes, systems and machinery for painting metals, Metalurgija - stroji in naprave, powder painting systems and machinery. Sedež podjetja je v kraju Herzebrock-clarholz, Nemčija.

THERMOSPRAY SRL

Italija

THERMOSPRAY SRL, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Jeklo in kovine - obdelava in prevleka površin. Deluje tudi v panogah systems and machinery for metal surface treatments and finishes. Sedež podjetja je v kraju Gessate, Italija.
BRÜNNET SYSTEMS GMBH

Nemčija

BRÜNNET SYSTEMS GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Površinska obdelava kovin - stroji in oprema. Deluje tudi v panogah Transportne naprave in sistemi, systems and machinery for metal surface treatments and finishes, Transportne naprave in sistemi. Sedež podjetja je v kraju Überherrn, Nemčija.
MEKI TEKNIK

Turčija

MEKI TEKNIK, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Bearbetning av stål och metall. Deluje tudi v panogah systems and machines for metal drilling, systems and machinery for metal surface treatments and finishes. Sedež podjetja je v kraju Bursa, Turčija.
TERMWAY GMBH

Nemčija

TERMWAY GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Elektronika - uvoz-izvoz. Deluje tudi v panogah systems and machinery for metal surface treatments and finishes. Sedež podjetja je v kraju Eiterfeld, Nemčija.
ERATEC

Francija

Eratec specialises in the design, manufacture and sale of metal fibre gas burners. Our burners are used in various applications such as heat treatments, metal treatments, painting, agrifoods and much more. The Eratec metal fibre burner head has a refractory stainless steel structure with a radiating surface made from Bekinit® knitted metal fibre and features an electronically controlled air-gas premix system. Our burners can produce standard blue flame or infra-red radiation for direct heat treatment applications. At Eratec, we work very closely with our clients to understand their exact requirements and offer them the most suitable technical solution for their industrial uses. Our team provides comprehensive assistance, covering everything from analysing needs to implementing the selected solution, allowing us to satisfy the needs of every client with utmost efficiency. We are proud to offer custom solutions for heat treatments, metal treatments, coatings and the agrifood sector. We are also able to produce custom burners matched to our clients' specific needs. Please don't hesitate to contact us for more details about our products and services.

Spletišče Ogled vseh izdelkov
KOFRA - LIVARNA D.O.O.

Slovenija

Glavna dejavnost družbe Kofra – livarna d.o.o. je tlačno litje aluminija. S pomočjo tlačnega litja izdelujemo aluminijeve odlitke: - motorne dele, - elektrodele, - avtomobilske dele, - traktorske dele, - črpalke, - električna in ročna orodja, - drugo... Litine prilagajamo potrebam in željam kupcev. Mesečna poraba omenjenih litin presega 130 ton. Certifikati: - ISO 9001/2008 - Sistem vodenja kakovosti; - v pripravi: ISO/TS 16949 in ISO 14001 Družba plasira svoje produkte na domače, večinoma pa na nemško tržišče. Proizvodni program je prilagojen zahtevam elektroindustrije in avtomobilske industrije na obeh ciljnih trgih.

Spletišče
DIENER ELECTRONIC GMBH & CO. KG

Nemčija

With 30 years of experience, Diener electronic‘s Plasma Surface Technology competence team as well as our cooperation partners in automation and implementation will show you individual ways to set up your planned production plant in a future-proof manner. As a global market leader, we have already sold more than 11, 000 systems worldwide. We offer the tailor-made solution for efficient processes in the fields of low- and atmospheric-pressure plasma systems as well as for parylene and vacuum systems. Let yourself be inspired by the possibilities we offer with our technologies and our unrivalled processes. We are looking forward to hearing from you! Comprehensive competence from one source Our customers benefit from the experience and know-how of dedicated employees as well as from state-of-the-art production equipment. Achieving success with advanced solutions At several locations in Baden-Württemberg, we develop and produce innovative solutions for economic, precise and environmentally friendly plasma treatment of surfaces – and we do this with enormous success. Since the company was founded, we have grown continuously and are now one of the leading manufacturers of plasma systems worldwide. Applications of our systems: Ultra-fine cleaning Surface activation, coating, etching Hydrophilic/hydrophobic coating Degassing / outgassing Height simulation Sensor calibration Leak test

Spletišče
EZM EDELSTAHLZIEHEREI MARK GMBH

Nemčija

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Spletišče
ADVANCED ENGINEERING WEDGE WIRE

Turčija

ADENWEDGEWIRE deluje v Technopark Istanbul, ki je največji tehnološki razvojni center v Turčiji. Izvajamo raziskovalne in razvojne aktivnosti z visoko usposobljenim inženirskim timom, specializiranim za oblikovanje in izdelavo specifičnih izdelkov iz mrežice za stranke, odvisno od zahtev. Naše mreže iz mrežic se osredotočajo na popolno zadovoljstvo strank v smislu konkurenčnih stroškov, kratkega časa dostave in visokih mehanskih lastnosti. Izdelava obsega robotske sisteme, ki omogočajo visoko natančnost in fleksibilne rešitve. Izdelano iz nerjavečega jekla 304, 304L, 304HC, 316, 316L, 316Ti, 321 ali odvisno od vaše zahteve z različnimi vrstami površinskih obdelav in premazov, ki temeljijo na uporabi. NAŠE SPOSOBNOSTI • Oblikovanje in izdelava edinstvenih in prilagojenih mrež iz mrežice • Oblikovanje in dobava zaslonov za vnos Coanda • Izdelava posebnih bi-cilindričnih zaslonov za širok spekter industrij • Specifične površinske obdelave, odvisne od uporabe, za daljšo življenjsko dobo • Specializirana konstrukcija nagnjene žice za zagotavljanje visoke zmogljivosti filtriranja NAŠE VREDNOTE (4C) • Stroškovno učinkoviti zasloni: visoka zmogljivost filtriranja in vzdržljivost po nižji enotni ceni • Prilagojene dimenzije: Izdelano glede na vašo zahtevo in potrebo • Zahteven čas dostave: najhitrejša možna dostava za takojšnje reševanje težav • Podpora strankam: Podpora pri oblikovanju in terenskih aplikacijah

Spletišče
HASPA GMBH

Nemčija

haspa GmbH is one of the few manufacturers which provides a complete product range for flexible shafts which is compatible with all currently existing systems. Special custom solutions and individual production processes keep us on our toes and present us with new challenges which we love to find solutions for. For over four decades, we have been active in this field which has expanded ever more as time went on. As a result, we now have three departments: Department I: OFT = Surface technology: Includes: Tool drives, flexible shafts and other surface treatment products (such as drive units for flexible shafts, pneumatic drives, micromotors, collets, abrasives, milling cutters, etc.). Department II: VST = Adjustment elements: Remote control and power transmission elements; adjustment and regulation. Department III: Special coils and tubes. One reason for our success is the way we take note of our customers' individual requirements.

Spletišče