Rezultati za

Leak testing systems - Uvoz izvoz

14 Podjetja

0 Izdelki

INFICON GMBH

Nemčija

INFICON is a leading provider of innovative measuring equipment, sensor technologies for critical processes and advanced process control software that enhance productivity and quality in sophisticated industrial vacuum processes in highly specialised sectors. These products are essential for gas leak detection in air conditioning/refrigeration technology and automotive manufacturing. They are also vital to original equipment manufacturers (OEMs) and end-users in the complex fabrication of semiconductor chips and thin film coatings (e.g. for flat panel displays, solar cells, magnetic and optical storage media, visual and decorative coatings and architectural glass). Other application areas for our vacuum technologies include the life sciences, research, aerospace engineering, food packaging, heat treatment, sterilisation and laser cutting. INFICON also uses its expertise to provide unique products for the analysis of toxic chemicals.

Spletišče
APT ANGEWANDTE PROZESSORTECHNIK GMBH

Nemčija

APT ANGEWANDTE PROZESSORTECHNIK GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merilniki specifične teže toka. Deluje tudi v panogah Flow rate measurement, Differential pressure switches, Flowmeters, Leak test devices, Flow meters for gaseous media, Leak testing equipment, Electronic pressure gauges, Electronic flowmeters, Leakage indicators. Sedež podjetja je v kraju Hürth, Nemčija.
ZELTWANGER LEAK TESTING SYSTEMS GMBH

Nemčija

ZELTWANGER LEAK TESTING SYSTEMS GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Nadzor in naravnavanje - aparati in instrumenti. Sedež podjetja je v kraju Tübingen, Nemčija.
APROVIS

Nemčija

APROVIS – innovation from a single source. APROVIS is an energy company that is active across the world. Our expertise focuses on exhaust gas and gas processing technology. We are experts in single components and system solutions. High quality and reliability have been important to APROVIS since it was founded in 2000. With an export ratio of over 50%, APROVIS is the only provider of system solutions in the CHP market for combustion gases of gas-powered engines and integrated solutions for cogeneration units – with its own products. APROVIS achieves extremely quick delivery times. We also personally support each project from planning to commissioning. We work strictly in accordance with applicable regulations and test standards, with the European Pressure Equipment Directive, ASME or EAC. APROVIS offers a wide range of products: For gas treatment, we offer FriCon gas cooling systems, ActiCo activated carbon filters, gas heat exchangers and compactors. The waste gas technology sector comprises waste gas heat exchangers, steam generators, catalysts (Oxi, three-way and SCR catalysts), diesel particulate filters and chimneys. High-temperature heat exchangers and leaking steam condensers are among special applications. APROVIS ensures a long service life for systems and devices thanks to maintenance, service and targeted spare part management. APROVIS means BETTER PERFORMANCE.

Spletišče
MINITEC GMBH & CO. KG

Nemčija

Precision and perfection: This is what MiniTec GmbH is all about. What began in 1986 with miniature linear guidance systems, developed into a full service provider now recognised globally with around 360 employees in nine plants and more than 60 partners and service support centres all over the world. The extensive product range includes high-quality aluminium profiles and powerful materials handling technology such as conveyors, precise linear guidance systems, profile systems, fire fighting technology and ergonomic workplace systems. Within the automation technology and specialised mechanical engineering sectors, MiniTec provides versatile solutions. From testing facilities to leak tests and eddy current testing, efficient materials handling solutions such as conveyors, roller conveyors, spiral conveyors or toothed belt conveyors as well as assembly technology solutions for one piece flow, materials handling and Kanban systems: MiniTec can provide multiple options to optimise and automate your assembly lines and existing production processes.

Spletišče

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

POPPE + POTTHOFF MASCHINENBAU GMBH

Nemčija

Poppe + Potthoff Maschinenbau GmbH develops and manufactures installations for operation and endurance testing of components in the automotive and shipbuilding sector as well as other industries. The precise and powerful special machines that this specialist for high pressure and testing technology produces, are used in research, development and production processes. This includes installations for bursting pressure and leak tests, pressure cycling testing, autofrettage as well as installations for testing the function of components. Our company, based in Nordhausen (Germany), is a member of the Poppe + Potthoff Group. As a developer of systems, we put our customers' requirements centre stage. Our focus is on technologically complex installation systems of testing and high pressure engineering. As a developer of systems, we offer everything from a single source; from concept development through to design and production (mechanical + electric) all the way to software development.

Spletišče
UNIVERSAL HYDRAULIK GMBH

Nemčija

Innovative systems determine the market of tomorrow. This is the principle which Universal Hydraulik has been following for more than 35 years when designing hydraulic systems, cooling systems, and heat exchangers, which are used all over the world in every field of application. Our heat exchangers are available as standard products, or can be specially customised to meet the requirements of your application. We use highly-precise software for our calculations, with drawings available in 3D. Our heat exchangers are tested up to five times during production. The cooling performance can be verified on our test rig. By purchasing one of our hydraulic and cooling systems, you'll be provided with a turnkey system from a single source. We design, manufacture, install and commission the complete system. All our systems are fully tested with regard to functionality and workmanship prior to delivery and are supplied with extensive documentation.

Spletišče
AGEA-KULL AG

Švica

agea-kull AG was established in 1996 through the merger of the two companies agea AG und Hans Kull AG. Today, the company specialises in the production of high-voltage and high-current testing systems for power engineering. The products serve as a form of quality assurance for components for electricity production and distribution and cover a wide range of cases in which high-voltage tests are essential, such as production and acceptance tests, commissioning and repair inspections, on-site status inspections and diagnosis. Among these, mobile testing facilities for on-site inspection are the focus of our portfolio of services. We also provide development, construction and manufacturing of high-voltage and high-current systems and components as well as repair und maintenance activities for these.

Spletišče
TESTEM GESELLSCHAFT FÜR MESS UND DATENTECHNIK MBH

Nemčija

TESTEM GmbH is a reliable supplier of measurement data recording systems and devices. Our many years of experience, comprehensive expertise and goal-oriented approach to solutions have allowed us to manufacture high-quality devices and systems for recording and transmitting measurement data as well as for determining physical parameters in the sensor segment. Thus, we provide systems for fuel quantity measurement and closing force measurement as well as powerful telemetry systems, fuel injection monitoring systems and high-quality HF amplifiers. With our extensive knowledge, we have come to focus on areas such as contactless (radio) data transmission. For example, in the area of radio data transmission, we produce diversity receivers, wideband receivers and wideband transmitters that function as data transmitters. Additionally, we offer powerful measurement recording devices such as data loggers and single-stroke engines that are used to simulate different motor operating states.

Spletišče
MICRO-EPSILON

Nemčija

MICRO-EPSILON, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merilne naprave in instrumenti. Deluje tudi v panogah Merjenje in naravnavanje lege in oddaljenosti - aparati in instrumenti, Sistem industrijske vizije, Colour analysers and sensors, laser meters, profilmätningsverktyg, capacity sensors (CTS), pyrometers, Thickness measurement equipment, time of flight sensors. Sedež podjetja je v kraju Ortenburg, Nemčija.

BAREISS PRÜFGERÄTEBAU GMBH

Nemčija

BAREISS PRÜFGERÄTEBAU GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Pregled površin. Deluje tudi v panogah Material testing devices, Test laboratories, accredited, Measuring devices for non-destructive material testing, Hardness test equipment, Plastic testing devices, Systems for destructive material testing, Service for testing machines, Testing machines for plastic, Rubber testing machines. Sedež podjetja je v kraju Oberdischingen, Nemčija.
PFEIFFER VACUUM GMBH

Nemčija

PFEIFFER VACUUM GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vakuumske črpalke. Deluje tudi v panogah Vacuum coating systems, Vacuum chambers, Rotary vane pumps, membrane pumps, screw pumps, Multi-stage roots pumps, Roots pumps, lobed compressors, Turbopumps. Sedež podjetja je v kraju Aßlar, Nemčija.

OVEC SYSTEMS LTD

Združena Kraljevina

OVEC SYSTEMS LTD, je podjetje tipa Multi-Category, ki deluje v panogi Detektorji uhajanja. Deluje tudi v panogah gas leak detection systems, helium leak tests, gas leak detection services, Leak detection/location technology. Sedež podjetja je v kraju Coatbridge, Združena Kraljevina.
BEINAT S.R.L.

Italija

BEINAT S.R.L., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Plinski detektor, nadzorne naprave. Deluje tudi v panogah Detektorji plina, gas leak detectors, Detektorji plina, gas leak detection systems, Gas sensors. Sedež podjetja je v kraju San Maurizio Canavese, Italija.

Poiščite ponudbe za

Filtri

Rezultati za

Leak testing systems - Uvoz izvoz

Število rezultatov

14 Podjetja