Rezultati za

Levelling - Uvoz izvoz

164 Podjetja

0 Izdelki

SIKA BELGIUM NV

Belgija

SIKA BELGIUM NV, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Zaključna dela. Deluje tudi v panogah Kemična sredstva za protikorozijsko zaščito, antistatic floors, epoxy polyurethane covers, levelling, Floor covering, varnish protection, bituminous membranes, admixtures for concrete and mortar, Kemična sredstva za protikorozijsko zaščito. Sedež podjetja je v kraju Nazareth, Belgija.
DENEIRE

Belgija

DENEIRE, je podjetje tipa Ponudnik storitev, ki deluje v panogi Javna dela. Deluje tudi v panogah demolitions, levelling, hydraulic public works. Sedež podjetja je v kraju Diksmuide, Belgija.
CEULEMANS LOONWERKEN

Belgija

CEULEMANS LOONWERKEN, je podjetje tipa Poddobavitelj, ki deluje v panogi Buldožerji in grederji. Deluje tudi v panogah agricultural work, garden work, levelling, ground-levelling for public works. Sedež podjetja je v kraju Sint-Katelijne-Waver, Belgija.
MONSERÉ

Belgija

MONSERÉ, je podjetje tipa Ponudnik storitev, ki deluje v panogi Rušitve - izvajalci. Deluje tudi v panogah demolitions, levelling, Sanitation. Sedež podjetja je v kraju Ingelmunster, Belgija.
TRANSPORTES LUJORAN

Španija

TRANSPORTES LUJORAN, je podjetje tipa Ponudnik storitev, ki deluje v panogi Izkop zemljišča - dela. Deluje tudi v panogah excavation work, earthmoving work, ground-levelling for public works, levelling. Sedež podjetja je v kraju Madrid, Španija.

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

AKTIF ÖLÇÜM ENSTRÜMANLARI SAN TIC LTD ŞTI

Turčija

AKTIF ÖLÇÜM ENSTRÜMANLARI SAN TIC LTD ŞTI, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merilne naprave in instrumenti. Deluje tudi v panogah Tlačna stikala, levelling, magnetic and electromagnetic flowmeters, Tlačna stikala, Pressure gauges. Sedež podjetja je v kraju Istanbul, Turčija.
ORBIS TERRARUM

Argentina

ORBIS TERRARUM, je podjetje tipa Ponudnik storitev, ki deluje v panogi Topografija - projektanstvo. Deluje tudi v panogah geotechnics and topography, bathymetric reliefs, levelling, photogrammetry. Sedež podjetja je v kraju Caba, Argentina.
SARL EGBTP

Francija

SARL EGBTP, je podjetje tipa Ponudnik storitev, ki deluje v panogi Izkop zemljišča - dela. Deluje tudi v panogah Rušitve - izvajalci, Rušitve - izvajalci, levelling. Sedež podjetja je v kraju Les Clayes Sous Bois, Francija.
MARCHES GLOBAL LTD

Združena Kraljevina

MARCHES GLOBAL LTD, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Umetne mase - gradbeništvo. Deluje tudi v panogah levelling, spacers. Sedež podjetja je v kraju Hereford, Združena Kraljevina.
SNOECK

Belgija

SNOECK, je podjetje tipa Ponudnik storitev, ki deluje v panogi Cestni prevoz. Deluje tudi v panogah levelling, demolitions. Sedež podjetja je v kraju Gooik, Belgija.

CLAES KRIS

Belgija

CLAES KRIS, je podjetje tipa Ponudnik storitev, ki deluje v panogi Klestenje in podiranje dreves. Deluje tudi v panogah earthmoving work, levelling. Sedež podjetja je v kraju Heist-Op-Den-Berg, Belgija.
PAUWELS GRONDWERKEN

Belgija

L.+ G. BECK GMBH

Nemčija

UNIOELER L.+G. Beck GmbH is a manufacturer of oilers and lubrication devices. The business was founded in 1961 as a family-run company and quickly became one of the first ports of call for the development, production and distribution of lubrication products. The range of products today includes equipment for minimum quantity lubrication (in many application areas, away from conventional circulation lubrication with emulsions), manually and electrically controlled drip oilers, special designs, gear pumps, piston pumps, central lubrication systems, oil containers, pressure containers V2A–V4A, level controllers, lubricators with various drive systems, lubrication nipples, oil gauges and oil level indicators. UNIOELER is therefore able to develop and offer suitable solutions for a wide variety of applications. These solutions are aligned to the requirements of the user, yet also take into account environmental considerations and legal requirements.

Spletišče
GHM MESSTECHNIK GMBH

Nemčija

ESTABLISHED: In 2009, GREISINGER electronic, Honsberg Instruments and Martens Elektronik merged to create GHM Messtechnik – a complete provider for measuring technology and industrial electronics. RESOURCES With around 300 employees and over 35 developers at a total of seven sites – in Erolzheim, Regenstauf, Remscheid, Barsbüttel, Owingen, Kassel and Padua/Italy – GHM Messtechnik is able to offer a complete range of products for the wide variety of requirements relating to measuring technology. SALES Our Germany-wide sales network provides excellent technical advice via our field service staff. Together with our sales subsidiaries in the Czech Republic, Denmark and the Netherlands, as well as sales partners throughout Europe, in North and South America, Asia and Africa, we have a presence throughout most of the world. The extensive network enables us to ensure optimum customer support on site.

Spletišče
BEDIA MOTORENTECHNIK GMBH & CO. KG

Nemčija

Although we remain a medium-sized business, our many years of focusing our skills on the fields of fill level and temperature detection under harsh ambient conditions has allowed BEDIA to become proficient in providing solutions that meet the high demands posed by our clients in their entirety. Since the company was founded, we have been "in touch with the medium" through the use of reliable and innovative technologies, having completely dispensed with mechanically moving parts that are often prone to failure. We are a recognised partner to numerous manufacturers of engines, construction machinery, agricultural machinery, industrial vehicles, buses, aggregates and compressors. Moreover, our capacitive fill level sensors have been authorised by ten classification societies for use in a wide variety of marine applications. We also offer a range of voltage transformers that stand out thanks to their compact design and low quiescent current consumption.

Spletišče
GERD HACKER HANDELS GMBH

Nemčija

The company Gerd Hacker was founded in 1970 as a sales agency and dealership for automotive parts and in recent years has increasingly specialised in supplying industry. Together with efficient suppliers, today it is mainly manufacturers of aggregates, construction machinery, rail vehicles, compressors and vehicle tanks. We provide you with high-quality products, including Blau (fuel tank caps and fuel pump nozzles for petrol, diesel, hydraulic and urea tanks (AdBlue); MotoMeter (displays for temperature, pressure and fill level displays, etc. and the accompanying sensors).

Spletišče
RITE-HITE GMBH

Nemčija

Rite-Hite GmbH is one of the leading German manufacturers of loading systems and the European headquarters of the Rite-Hite corporation, the American market leader in the field of gate systems and loading systems. The company's core competencies are centred around substantially improving safety, security, productivity and energy efficiency at loading bays. Its comprehensive range of products includes ISO loading bays, modular docks, dock levellers, gate seals, vehicle locking systems, safety barriers, cold storage doors and high-speed doors, industrial fans and supplementary products for loading bay management. Thanks to its global network of production sites, subsidiaries and dealers, Rite-Hite is able to adapt its comprehensive range of products to the regional requirements of practically every country and provide suitable on-site service.

Spletišče
SMAAT TECHNIQUES

Francija

SMAAT TECHNIQUES, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merilniki pretoka. Deluje tudi v panogah Senzorji, Merilni in kontrolni instrumenti, chemical sector appraisals, level sensors, Pressure sensors, magnetic and electromagnetic flowmeters, water treatment, ultrasound equipment, Sensors, probes, transmitters. Sedež podjetja je v kraju La Mulatière, Francija.
LALK GMBH &CO. KG

Nemčija

LALK GMBH &CO. KG, je podjetje tipa Prodaja na debelo, ki deluje v panogi Diamantna orodja. Deluje tudi v panogah Stativi za kamere, Vodne tehtnice (libele), GPS location systems, Band measurements, Construction lasers, Diamond drill bits, Diamond cutting discs, Joint cutters, Floor grinding machines. Sedež podjetja je v kraju Bimöhlen, Nemčija.
SEMIN

Francija

SEMIN Is a family-run French industrial group specializing in the manufacture of building materials. We provide quality solutions to the building trade for construction and interior renovation of dwellings. Innovation has been part of SEMIN's DNA since 1838... our main aim being to develop technical solutions that make product application easy and save time on building sites. SEMIN has 6 industrial sites in France and 4 abroad and employees 650 people. The group turns over € 160 M, 40% of which is abroad in more than 66 countries worldwide. We are customer-centric. The proximity of our teams out on the ground combined with our flexibility and responsiveness are factors that make us stand out. We are convinced that the quality of service that we provide our customers is of the essence. The group plans to expand responsibly by keeping our environmental impact closely under control.

Spletišče

ROSTA AG

Švica

ROSTA is your first choice for rubber spring and damping systems. With over 70 years’ experience, ROSTA is the leading manufacturer of rubber spring mountings worldwide. It all began in the middle of the 1940s, when Mr Rohr, in Staufen (RoSta), was commissioned to develop a simple and economical solution to support trailer axles. The three main functions – suspension, damping and bearing – lead to the creation of the ROSTA rubber spring element. Today, ROSTA AG exports more than 90% of its products. With six subsidiaries and 35 distribution partners. With a clear growth strategy, ROSTA is expanding on levels.

Spletišče
BÄCKER GMBH & CO. KG

Nemčija

Bäcker has been a manufacturer and supplier of technical standard parts and control elements made of plastic and metal, as well as individual solutions made of plastic for industry, for more than 40 years. The wide product range of more than 5000 items with a total of 23, 000 different variants and dimensions of standard products from the three series PlacoGrip®, PlacoTec® and PlacoCap®. Overview of our product series. PlacoGrip® – control elements (knobs, levers, hinges, etc.). PlacoTec® – standard elements (DIN screws, nuts, washers made of plastic, etc.). PlacoCap® – protective elements (caps, plugs, sanitary fastenings, etc.) We manufacture products for leading industrial companies from a variety of sectors: Electrical engineering electronics, medical technology, machinery and systems engineering, the automotive industry, the chemical industry, shipbuilding, the leisure and sports equipment industry, the sanitary industry and rehabilitation equipment.

Spletišče
R+L HYDRAULICS GMBH

Nemčija

R+L HYDRAULICS develops and manufactures a portfolio of high-quality components for fluid and drive technology that is both comprehensive and tailored to your requirements. Individual solutions for the most stringent demands in machinery, ship and vehicle construction, in the steel industry and offshore technology, and for special plant engineering applications, form an important part of your company's success. THE BENEFITS FOR YOU: Quality components on fair terms; improving your market share by taking advantage of our expertise in development, quality and service; direct, personal consultations with our Customer Service department; quick delivery through an optimised supply chain; project-specific development of our components to meet your individual requirements; shortening your response times: The FLUIDWARE APP sizing tool can help you calculate the design of an assembly, such as pump carriers, shaft couplings and accessories, immediately, based on your individual criteria.

Spletišče
KELLER PRESSURE

Švica

KELLER – A market leader in the production of isolated pressure transducers and transmitters KELLER Pressure was established in 1974 by Hannes W. Keller, the inventor of the integrated silicon measuring cell. Today, his sons Tobias and Michael Keller run the business. The company is wholly family-owned and employs 480 staff. KELLER feels a strong connection to its home of Switzerland. Its headquarters are where the value is added and where most of our employees work. As a result, all KELLER products bear the quality seal 'Made in Switzerland' and embody the Swiss values of quality, functionality and reliability. KELLER Druckmesstechnik AG, including KELLER Gesellschaft für Druckmesstechnik mbH in Jestetten, is certified to ISO 9001. This means that our measured values can be fully traced to national standards. As a company that operates on an international scale, KELLER is represented at a number of locations around the globe. Because we are committed to offering the best service to our customers, you will always receive advice in your local language. KELLER has ten branches in Europe, Asia, South America and the USA. Various representatives and distributors also support our branches in other countries.

Spletišče
PIC GMBH

Nemčija

PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH (known as PIC) is a globally operating medium-sized company based in the Nuremberg area. With our own production facilities in China and Turkey as well as sales offices in Asia and Europe, we can guarantee the highest quality of production, close relationships with our customers and the ability to develop specific solutions quickly and efficiently. For over 40 years, we have been one of the world's leading suppliers of reed sensor technology. A broad range of technical expertise, many years of experience and the ability to innovatively implement our customers' wishes make us an ideal partner for manufacturers of home appliances, automotive parts, medical technology and devices for measurement, control and regulation. PIC – SWITCHING THE SMART WAY!

Spletišče
CHETRA DICHTUNGSTECHNIK AG

Nemčija

In line with top quality standards. Welcome to CHETRA! We are an international specialist in providing high quality and high capacity mechanical seals. Our products and solutions meet the most demanding technical requirements. CHETRA offers wide-ranging expertise and experience covering the main branches of industry, while guaranteeing "Made in Germany" quality standards for every product. In line with individual customer requirements. Whether it is mechanical seals in accordance with the latest standards for complex applications or packings, gaskets, sealing tapes, pure graphite seals, liquid seals, sealing compounds or related services – in the CHETRA portfolio, you will find the perfect solution for your requirements. And if our basic product range is not sufficient, our experts are available to develop a tailor-made solution for you. We will be happy to advise and accompany you from the initial idea to the point where your solution is put into operation and to our after-sales service.

Spletišče
ISOLOC SCHWINGUNGSTECHNIK GMBH

Nemčija

The aim of the new company, isoloc, is to develop innovative and high-quality products "Made in Germany" in the field of set-up technology and vibration insulation for all kinds of machinery and systems. We consistently pursue this aim with our team of qualified specialists. Today, our company is successfully active in all areas of industry around the world. The size of the machine is not important. We store small machine tools as well as large forging presses, but also machinery from the areas of metal working, plastic, pressing and paper, the chemical industry, wood processing, food, electrics and the construction industry. Our wide range of services also includes insulating buildings such as the Swiss embassy in Berlin, and heavy machine foundations (support foundations) for large machines and systems. Your perfection is our goal!

Spletišče
RUDOLF STÖFFL GES.M.B.H. TECHNISCHE PRODUKTE

Avstrija

Innovative, skilled and fair ... with this philosophy in mind, a small team around Rudolf Stöffl founded the Austrian company RUDOLF STÖFFL GmbH in 1989. The company, based in Holzhausen and enjoying steady growth, made a name for itself right from the beginning, and took on a soon well established role on the market. Stöffl GmbH was primarily active in the sale and expansion of an extensive range of bonded rubber-metal products for trade and industry. Healthy growth and growing acceptance on the market created the conditions for efficient expansion into new product groups. We can now offer our customers: Profiles in the form of PVC edge trims, sealing profiles, sponge rubber, plastic parts such as moulded tube plugs or sealing elements, standard parts such as knobs and handles, cable glands, connections, and special components for conveyors. The product groups in the area of plastic hoses, PU protection profiles and rubber sheets were expanded.

Spletišče
DOCKING SOLUTION UND SERVICE GMBH

Nemčija

Partner for flexible logistics solutions. docking Solution und Service GmbH have been serving the needs of specialist retailers and service companies for more than five years, providing spare parts and components in the field of loading technology. Despite its tender age, the mydocking team has around 200 years of experience in loading technology. A broad product range with a wide variety of spare parts for well-known manufacturers of loading technology, including loading bridges, dock shelters and accessories, as well as constant availability via the online shop, have guaranteed satisfied customers since 2008.

Spletišče
XIMEA GMBH

Nemčija

XIMEA develops and distributes industrial and scientific grade cameras for various applications. Our core strengths include particularly compact form factors in comparison to sensor size, low latency and energy consumption, as well as super-fast interfaces and high resolutions. From high-performance cameras to embedded and multi-camera systems – XIMEA offers special products for the most ambitious of requirements. Series cameras and customer-specific developments and modifications are used by leading technology companies and visionary start-ups all over the world. With over 25 years of experience, the engineers at XIMEA are continually setting new standards in the industrial and scientific image processing and imaging markets. You can find more information at www.ximea.com or on Facebook and LinkedIn.

Spletišče