Rezultati za

Flat springs - Nemčija

13 Podjetja

0 Izdelki

ZIMMERMANN TECHNISCHE FEDERN GMBH

Nemčija

ZIMMERMANN Technische Federn is an expert development and series supplier of springs and assemblies for complex applications. ZIMMERMANN Technische Federn GmbH has its registered office in Leutersdorf, where the borders of three countries meet. The Zimmermanns have over 100 years' experience in developing and manufacturing complex spring systems. Over the years, a strong relationship of trust has been built up between customers, employees and the management. The product range spans from compression, draw and torsion springs to bent wire parts, bent strip parts, complex plate and spiral springs through to diverse assemblies. Nothing's impossible! ZIMMERMANN Technische Federn GmbH has very high expectations of itself and of the quality of its spring systems. Thanks to the excellent training of employees, ZIMMERMANN has developed extensive expertise in its specialist area.

Spletišče
LESJÖFORS INDUSTRIAL SPRINGS & PRESSINGS GMBH

Nemčija

Die Lesjöfors Group is one of the largest manufacturers of technical springs in the world. Our range of products in spring technology includes wire and leaf springs, punched and bent parts, and gas springs. Our experience in spring manufacturing dates back to 1852. Today, over 1800 motivated employees ensure that everything from technical design and spring calculation through to dispatch runs smoothly and professionally. Thanks to our many years of experience in springs, stamping technology and bending technology, we provide our customers with customised solutions which can be implemented in a timely manner due to our flexible production capacity. We are active on the international stage with regard to continuing globalisation. Currently, we have production and sales sites in Sweden, Finland, Norway, Denmark, Germany, the Netherlands, Great Britain, Slovakia, Latvia, Russia, China, Thailand, Singapore, Mexico and the USA .

Spletišče
RÖHRS, DR. WERNER

Nemčija

Known worldwide as a specialist in highly stressed technical springs since 1919. The product range contains springs of every type and form. Its manufacturing program includes, in particular, compression springs made of round and flat wire, disc springs, helical disc springs, multi-wire springs and many other springs. Products: Leaf, flat and shaped springs, damping springs, compression springs, flat wire springs, multi-wire springs, levelling feet, helical springs, disc springs, torsion springs, vortexers and more.

Spletišče
MONNINGER FEDERN GMBH

Nemčija

Monninger has been the expert company for stainless steel and steel springs for more than 75 years. Experience, customer relations and quality awareness have always formed the basis for our success. We were certified in accordance with ISO 9001 for the first time 1994. With our ISO/TS 16949 certification in 2012, we entered a new era which continues to influence everything we do. The solid company has long since become a brand which has made a name for itself both among customers and expert groups. The company's good reputation is based on solid constant factors which have been in place from its foundation in 1945 to today: Precision. Dynamism. Engineering spirit. Enabling dynamics. It is time to more intensively devote ourselves to these key skills, to strategically orient the company towards the future and to position the business in a manner that is externally visible. In close collaboration with brand consultants solldesign, Monninger has prepared a brand relaunch which creates an identity and sends clear signals.

Spletišče
PIERON GMBH

Nemčija

Since 1925, PIERON – a family-owned company now in the hands of its fourth generation – has manufactured technical springs for almost all industry sectors. We focus on the automotive as well as on the electrical and sports equipment industries. At our Bocholt site, over 270 employees implement new solutions in the product areas of annular, compression and torsion springs as well as stamped, bent and wire bent parts on an operating area of approx. 20, 000 m². Special parts and assemblies complete our product range. State-of-the-art manufacturing processes guarantee production that meets the highest requirements.

Spletišče

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

P.J. PRAUSE DUROTEC GMBH

Nemčija

In 1974, Paul Joachim Prause founded the company Schichtstofftechnik Prause, which was renamed the P. J. Prause Durotec GmbH in 1998. P. J. Prause had previously, as part of 3M Germany, significantly contributed to shaping the technical application of synthetic leaf springs in Germany with Scotchply™ glass-fibre composites. This enabled Prause Durotec GmbH to acquire more than 35 years of experience in the manufacture and application of leaf springs made from fibre composites. Prause Durotec is a medium-sized company with 16 members of staff and a global customer base. The range of products we manufacture includes all configurations of flat leaf springs with E-glass, S-glass, carbon fibres, with epoxy resin providing the matrix. The procedures used to process the UD prepregs (UD = unidirectional) comply with aeronautical and military standards.

Spletišče
FWH FEDERNFABRIK WILHELM HESSE GMBH

Nemčija

FWH FEDERNFABRIK WILHELM HESSE GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vzmeti. Deluje tudi v panogah Spring clips, Springs for the electronics industry, Springs for electrical engineering, Standard springs, compression springs, Compression springs, special springs, Fjäder med dubbel spiral, bent wire parts. Sedež podjetja je v kraju Ebersbach-Neugersdorf, Nemčija.
FEDERNFABRIK SUBTIL GMBH - (SUBTIL GROUP)

Nemčija

FEDERNFABRIK SUBTIL GMBH - (SUBTIL GROUP), je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vzmeti, listnate. Deluje tudi v panogah compression springs, flat springs, bent wire parts, torsion springs. Sedež podjetja je v kraju Reiskirchen, Nemčija.
ADOLF BRENNE GMBH & CO. KG

Nemčija

ADOLF BRENNE GMBH & CO. KG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vzmeti. Deluje tudi v panogah bent wire parts, flat springs. Sedež podjetja je v kraju Iserlohn-Letmathe, Nemčija.
LÖHR GMBH & CO PRÄZISIONSFEDERN KG

Nemčija

We are a medium-sized manufacturer of technical springs based in Schwabach near Nürnberg. Employing a staff of 50 employees, we are a traditional and highly-competent manufacturer of technical springs and bending parts made from steel, stainless steel and non-ferrous metals for use in resolving special problems and mass production. At Löhr GmbH & Co. Präzisionsfedern KG, know-how drives innovation. Know-how is a combination of past experience and anticipation of the latest developments. Innovative solutions need both. Take advantage of our experience, knowledge, quality and delivery reliability.

Spletišče

LENZ, KÄMPER GMBH & CO KG

Nemčija

LENZKÄMPER is one of the leading providers of bent-wire parts on the German market. Over the course of more than 90 years, LENZKÄMPER has become a specialist in producing technically complex bent-wire parts and components with high safety requirements. We not only manufacture individual bent-wire parts, but also complex welded units and hybrid components made from wire, sheet metal and plastic. Our flexible machinery enables us to efficiently produce series of any size for you, and our internal tool shop means we can even make prototypes at short notice. So that we can provide the best customer service, we place particular emphasis on providing customer-oriented consulting. We work with clients to devise and develop technical solutions, and guarantee a seamless transition between technical consulting, prototype production and series production.

Spletišče
ROTOR CLIP / TRUWAVE GERMANY GMBH

Nemčija

ROTOR CLIP / TRUWAVE GERMANY GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vzmeti, spiralne. Deluje tudi v panogah Jeklo in kovine - oblikovanje in rezanje, Retaining rings, Stainless steel retaining rings, circlips, Shim washers, Form springs, Hose clamps, Seeger rings, bent wire parts. Sedež podjetja je v kraju Idstein, Nemčija.

HFP BANDSTAHL GMBH & CO KG

Nemčija

In our company, HFP Bandstahl in Bad Salzungen, we now look back on more than 100 years of experience in cold rolling and almost 150 years in the metal business. With over 250 employees, it is also our largest location. Cold-rolled steel strips in accordance with EN 10139/10140 in market standard grades, rolled to any strength class, with thicknesses between 0.20 and 2.50 mm and widths between 4 and 525 mm. Cold-rolled case-hardening steel, heat-treated steel and spring steel in accordance with EN 10132 T1-4/10140 in market standard grades, strength classes G or G + K, with thicknesses between 0.20 and 1.80 mm and widths between 10 and 370 mm. Surface finish: Normal bright annealed, custom roughened or polished as well as crack-free and non-porous, level-wound coils, stretched ultra-flat and/or degreased.

Spletišče

Poiščite ponudbe za

Filtri

Rezultati za

Flat springs - Nemčija

Število rezultatov

13 Podjetja