Rezultati za

Metal alloys - Nemčija

12 Podjetja

0 Izdelki

GMR GESELLSCHAFT FÜR METALLRECYCLING MBH

Nemčija

GMR Gesellschaft für Metallrecycling mbH was founded in 1991. Today, the company employs a team of 12 and operates around the world. By 2001, we were already recording an annual turnover of 1.5 million EUR. The company specialises in the environmentally friendly recycling of used mercury and every type of waste containing mercury, with the aim of recovering the precious raw material, cleaning it and returning it to the economic cycle as mercury of the highest purity grade. The company has recently seen success in the vacuum treatment and immobilisation of naturally radioactive slurries and residues that contain mercury and in the production of precious metal concentrates out of waste products and residues containing precious metals. From its base in Leipzig, the company operates four vacuum recycling plants of varying capacities, each of them compliant with the German Emissions Protection Act (BImSchG).

Spletišče
C:MET GMBH

Nemčija

C:MET GMBH, je podjetje tipa Prodaja na debelo, ki deluje v panogi Kositer in zlitine. Deluje tudi v panogah Kositer - zlitine, Pločevina in trakovi, kositrovi, Svinec in zlitine, Bearing metals, Solder wire, pewter, Tin wire, Tin semi-finished products, Kositer - zlitine. Sedež podjetja je v kraju Wendelstein, Nemčija.
SL GLEITLAGERTECHNIK GMBH

Nemčija

SL Gleitlagertechnik GmbH concerns itself with the development, construction and distribution of self-lubricating, maintenance-free plain bearings made from metal, metal alloys, sintered metal alloys, plastics and combinations of these materials, as well as providing consultation on these matters. The selection of products offered by the company ranges from conventional plain bearings on a bronze base with lubricating pins to a wide variety of application-dependent lubricant combinations, as well as newly developed products with 99.9% highly pure and chemically neutral graphite to prevent electrolytic corrosion. SL Gleitlagertechnik GmbH delivers worldwide with an export rate of over 60%. Special products include plain bearings made from highly pure nickel with dry lubricant for the chemical industry, which are intended for use in aggressive media and radioactive conditions, and high temperature plain bearings that can be used at temperatures of up to 850 °C under certain operating conditions.

Spletišče
DEUTSCHES METALLFASERWERK DR. SCHWABBAUER GMBH & CO. KG

Nemčija

DEUTSCHES METALLFASERWERK has been a successful family-run company since 1951 – and we are now in our third generation. Our experience in developing and manufacturing STAX metal fibres covers a wide range of different materials and delivery forms such as continuous fibres, short fibres and non-wovens. As specialists, we are now one of the world's leading companies in this sector. At our sites in Neidenstein (Germany) and Dasnice (Czech Republic), we produce STAX metal fibres from non-alloy steel, stainless steels 1.4113 and 1.4841, copper Cu99, brass MS67 and aluminium AlMg5. A new material for your application could be among these.

Spletišče
ROBERT RÖNTGEN GMBH & CO. KG.

Nemčija

ROBERT RÖNTGEN GmbH & Co. KG is one of the world's leading manufacturers of saw bands and saw blades for metal cutting. The basis for our success is the high quality of the metal saw bands and the extensive delivery range for sawing tasks, from standard material to super alloys. RÖNTGEN metal saw bands mean economical and reliable work with your band saw machines. With over 100 years of experience in manufacturing metal saw bands and the proverbial "Made in Germany" RÖNTGEN quality, RÖNTGEN sets standards worldwide in the areas of speed and cost per cut. From its foundation in 1899 in Remscheid to the present day, consistent and continuous improvements and innovations have been at the centre of our in-depth development work.

Spletišče

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

EWG E. WAGENER GMBH

Nemčija

EWG in Heimsheim in the heart of Baden-Württemberg is your ISO-certified, number one supplier, retailer and partner. Our range includes rods, pipes, bars, wires, standardised parts (such as screws, nuts and threaded rods), plates, sheets and foils made from various special metals, refractory metals and rare earths. Our specialised field includes standardised parts – such as screws, nuts and threaded rods – precious metal semi-finished products and drawing parts made from molybdenum, tantalum, tungsten, titanium and their alloys (TZM, Alloys Invar, Alloys Kovar, Inconel). The machining possibilities of the different materials, depending on their properties, are very diverse. These include annealing, cold rolling, turning, milling, grinding, eroding, welding, bonding (curing), pickling, reaming, boring, laser marking and punching.

Spletišče
ALUMINIUM KRÜGER GMBH

Nemčija

ALUMINIUM KRÜGER GMBH, je podjetje tipa Ponudnik storitev, ki deluje v panogi Sortiranje odpadkov - stroji in oprema. Deluje tudi v panogah non-ferrous metals and alloys, solid waste management, Metal trade, waste recycling, Recycling, Scrap processing, Stainless steel scrap, Material disposal, scrap recycling. Sedež podjetja je v kraju Verl, Nemčija.
J. C. KÖNIG STIFTUNG & CO KG

Nemčija

J. C. KÖNIG STIFTUNG & CO KG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vlečenje jekla in kovin. Deluje tudi v panogah deep-drawn metal parts, non-ferrous metals and alloys, drawn copper products, Stainless steels. Sedež podjetja je v kraju Solingen, Nemčija.
DMA HAMBURG INOX & ALLOYS GMBH

Nemčija

DMA HAMBURG INOX & ALLOYS GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Nerjaveče jeklo. Deluje tudi v panogah coils, sheet metal, ferrous metal and alloy machining, electrogalvanized and pre-painted stainless steel strips. Sedež podjetja je v kraju Hamburg, Nemčija.
MG HANDEL AG

Nemčija

MG HANDEL AG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Industrijski izdelki. Deluje tudi v panogah Žice in kabli, aluminijasti, Žice in kabli, aluminijasti, aluminium pipes, Copper Cables, non-ferrous metals and alloys. Sedež podjetja je v kraju Wildau, Nemčija.

FEHRMANN GMBH

Nemčija

FEHRMANN Materials produces industrial-grade, high-performance aluminium and can meet the highest demands and requirements. We develop high-performance aluminium alloys for 3D printing, casting and extrusion applications for other vendors and we use these ourselves for the industrial production of sand-casting parts. Fehrmann is a one-stop shop distributor for established 3D printing metal powders such as tool steel powder (1.2709), stainless steel powder 316L, AlSi10Mg, TiAl6V4 powdered alloy (fine/coarse) and CoCr powder. By up scaling quantities, combined with optimised storage and quality assurance, we bring together the advantages of international trade to meet the availability and quality requirements of our customers and promote 3D printing. An additional focus is the development of an aluminium alloy (AlMgty®) with particular mechanical properties – known as high-performance alloys. These are used for casting (sand, chill and die casting) as well as in extrusion and additive manufacturing/3D printing (LPBF/SLM and DED). As experts in aluminium alloys, we place great emphasis on quality and reliability. We aim to always create added value for our customers. Tailor-made solutions, the best quality for decades of use and excellent advice even for the highest of requirements. We love breaking new ground. "Not possible" ? – We'll see.

Spletišče
THYSSENKRUPP SCHULTE GMBH, ZWEIGNIEDERLASSUNG EISENMETALL, STUTTGART

Nemčija

Thanks to many years of co-operation with manufacturing plants and partners in the metal trade, we have the best contacts in the procurement market. Special solutions and urgent demands can therefore be realised at short notice. Contemporary service-oriented thinking is more than just providing and trading materials. As a good consultant and problem-solver, we see your requirements as our job. The perfect combination is generally what turns a service into a quality service – having the desired product of the right quality available at the right time and at the right price. The interplay of these factors ensures the long-term success of our customers. Our extraordinarily wide range of products in an extensive material warehouse for non-ferrous semi-finished products ensures fast and flexible order processing. We supply you with aluminium, copper, brass, bronze, nickel silver, stainless steel and many other special materials or alloys in the form of strips, sheets, plates, rods, pipes, profiles and much more. We offer not only standard products but also diameters that are less common, thin or thick, as well as intermediate and special dimensions, special formats and special products. Take advantage of the advisory service provided by our experienced metal specialists – regardless of whether you are interested in lead-free alloys or the possible applications of different alloys or strengths.

Spletišče

Poiščite ponudbe za

Filtri

Rezultati za

Metal alloys - Nemčija

Število rezultatov

12 Podjetja