Rezultati za

Plastic pipes - Uvoz izvoz

4.259 Podjetja

3 Izdelki

CMPLAST

Poljska

CMPLAST, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Umetne mase - polizdelki. Deluje tudi v panogah Polietilen, Zobniški pogoni, machining of parts |, polyamides, polycarbonate, polypropylene, Polietilen, CNC milling, Digitalstyrd svarvning. Sedež podjetja je v kraju Dlugie, Poljska.
INDUMAT

Belgija

INDUMAT, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Cevke in cevi, iz gume in umetne mase. Deluje tudi v panogah Cevke in cevi, iz gume, Cevke in cevi - kositrne, Cevke in cevi - jeklene, plastic pipes, Cevke in cevi, iz gume, Cevke in cevi - kositrne, Cevke in cevi - jeklene. Sedež podjetja je v kraju Bruxelles, Belgija.
FAMATEKNIK

Turčija

FAMATEKNIK, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Gibke cevi in cevke - iz umetne mase. Deluje tudi v panogah compressed-air spirals, plastic pipes, industrial pneumatic tools. Sedež podjetja je v kraju Cayirova, Turčija.
MPLAST OOD LTD

Bolgarija

MPLAST OOD LTD, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Fitingi (za cevi in gibke cevi) - iz umetne mase. Deluje tudi v panogah ppr rörskarvar för kallt och varmt vatten, kopplingar för PPR-rör, plastic pipes, sanitaryware. Sedež podjetja je v kraju Plovdiv, Bolgarija.
DOYA TECHNOLOGY

Turčija

DOYA TECHNOLOGY, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Cevke in cevi, iz gume in umetne mase. Deluje tudi v panogah pvc, plastic pipes. Sedež podjetja je v kraju Karatay, Turčija.

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

TAMTEL KABLO SANAYI

Turčija

TAMTEL KABLO SANAYI, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Superprevodni kabli. Deluje tudi v panogah screened electrical cables for electronics and telecommunications, cables with plugs, plastic pipes. Sedež podjetja je v kraju Istanbul, Turčija.
MULTITECH PLASTIK MAKINALARI LTD STI

Turčija

MULTITECH PLASTIK MAKINALARI LTD STI, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vlivanje plastike - stroji. Deluje tudi v panogah plastic pipes, corrugated pipes, automatisk plaströrskapare, extruderingslinje. Sedež podjetja je v kraju Istanbul, Turčija.
HURSIN ET FILS SA

Francija

HURSIN ET FILS SA, je podjetje tipa Prodaja na debelo, ki deluje v panogi Gibke cevi in cevke - iz umetne mase. Deluje tudi v panogah plastic fittings, plastic pipes. Sedež podjetja je v kraju Pithiviers, Francija.
PIPESTOCK LIMITED

Združena Kraljevina

PIPESTOCK LIMITED, je podjetje tipa Prodaja na debelo, ki deluje v panogi Industrijska izdelava pip. Deluje tudi v panogah plastic pipes, plastic pipe fittings. Sedež podjetja je v kraju Romsey, Združena Kraljevina.
BAODING LIDA PLASTIC INDUSTRY CO., LTD.

Kitajska

BAODING LIDA PLASTIC INDUSTRY CO., LTD., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Umetne mase - gradbeništvo. Deluje tudi v panogah plastic pipes. Sedež podjetja je v kraju BAODING CITY, Kitajska.

E-M-C-DIRECT GMBH & CO. KG

Nemčija

E-M-C-DIRECT GMBH & CO. KG, je podjetje tipa Prodaja na debelo, ki deluje v panogi Industrijski kabli. Deluje tudi v panogah plastic pipes. Sedež podjetja je v kraju Dorsten, Nemčija.
QINGDAO KAICHENG PLASTIC CO, LTD.

Kitajska

QINGDAO KAICHENG PLASTIC CO, LTD., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Plošče, iz umetne mase. Deluje tudi v panogah plastic pipes, plastic profiles. Sedež podjetja je v kraju Qingdao, Kitajska.

AL AMAL PIPES ( AL SHARIF )

Egipt

AL AMAL PIPES ( AL SHARIF ), je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Fitingi (za cevi in gibke cevi) - iz umetne mase. Deluje tudi v panogah plastic pipes, plastic fittings. Sedež podjetja je v kraju Cairo, Egipt.
DERIPLAST SPA

Italija

DERIPLAST SPA, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Gibke cevi in cevke - iz umetne mase. Deluje tudi v panogah plastic pipes. Sedež podjetja je v kraju Villadose, Italija.
QTRNADA COMPANY

Irak

QTRNADA COMPANY, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Umetne mase - gradbeništvo. Deluje tudi v panogah plastic pipes, plastic pipe fittings. Sedež podjetja je v kraju basrah, Irak.
LATPLAST SIA

Latvija

LATPLAST SIA, ki deluje v panogi Cevke in cevi, iz gume. Deluje tudi v panogah plastic pipes. Sedež podjetja je v kraju Riga, Latvija.
SCHERNBERGER SEILTECHNIK GMBH

Avstrija

SCHERNBERGER SEILTECHNIK GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Trakovi in vrvi. Deluje tudi v panogah BRAIDS, Mason's cords, ropes, Guys, cords, lacing, braided articles, Cone linen, Tarpaulin rope made of plastic, Reflective cords, Lace, shoelaces. Sedež podjetja je v kraju Putzleinsdorf, Avstrija.
TEKNO AIR CONDITIONING AND ENGINEERING

Turčija

Tekno Air Conditioning and Engineering Inc. is a Turkish supplier of various construction and natural gas materials from Denizli, Turkey. With more than ten years of experience in the construction industry, we always work to expand our product range to provide the best service to our customers. We serve our customers in our 650 m2 Gümüşçay Showroom and 1150 m2 Ege ceramic Showroom branches. We offer everything you need in sanitary ware and ceramics with our experienced sales consultants. In addition, we do our best to increase our product portfolio yearly with our innovative approach. As Tekno Air Conditioning and Engineering Inc. we supply construction infrastructure materials such as : •Pipes and fittings, •Building materials such as plastic fittings, In our Ceramic group : •Bathroom fittings and accessories, •Washbasins, •Lavatory bowls, •Bathroom floor coverings, •Sanitary wares and many more are to be discovered on our website! Our vision is to stand behind our products by not compromising on quality despite the heavy competition conditions in the market and to adopt the innovative approach as our principle. Please do not hesitate to contact us for more information!

Spletišče
ERRECINQUE S.R.L

Italija

Errecinque is a leading company in the sector of thermoplastic pipes and injection moulding of plastic and rubber parts for industry, and for the automotive sector in particular. On the market from as early as 1981, the company has 4 factories in Italy, 1 in Romania in JV with Rochling Automotive and 1 branch with warehouse in the USA near Detroit.

Spletišče
INNOPLASTICS AG

Švica

InnoPlastics AG processes plastic waste into high-quality plastic regranulates using sophisticated technology. The company produces around 16, 000 tonnes of this regranulate per year. Its standard products also include the following granulate types: LDPE foils and pipe qualities – transparent or coloured; HDPE and HDPE-LDPE mixtures – coloured and black for pipe applications. Upon request, we also perform contract painting, washing and regranulating. InnoPlastics AG, as the successor to Poly Recycling AG, has 30 years of experience in plastics recycling. It is now one of the most professional and respected companies in the sector. InnoPlastics' plastic regranulates are used by pipe, film and injection-moulding companies in Switzerland and in EU countries.

Spletišče

MING XIAO MANUFACTURING CO., LTD

Kitajska

Ming Xiao Manufacturing Co., Ltd. is a professional ISO9001 certificated Metal Parts & Plastic Parts manufacturer, Located in China Ningbo, Specialized in Services of Sheet Metal Fabricating, CNC Turning & Machining, Tube Bending, Cold Forging & Hot Forging, Plastic Injection Molding & Plastic Extrusion. We produce small & large turned parts and machined parts, Precision CNC Turned Parts by CNC Turning & Milling. Metal stamping Parts, Deep Drawing Parts, Metal parts welding and forming, Pipe Bending & fabricating components, Cold & Hot Forged Parts from Stainless Steels, Carbon steels, Brass & Copper, Aluminum Alloys. And produce Plastic injection molded parts, Plastic extrusion profiles and tubes. We are working metal parts & plastic parts for various industries, custom produce a wide variety of machine parts and hardware components according customer’s drawing or sample, such as metal shafts, steel rods, bushings, Sleeves, Flanges, tubes, pipe coupling, fittings of valves; Metal stamping brackets, frames, clamps, casing, housing; deep drawn components; tube bending components; cold & hot forging parts, studs, bolts, screws, nuts, pins; steel wire forms, metal springs and all kinds metal components, plastic injection molded parts, plastic extrude profiles and pipes… We provide a wide range of machining services, can satisfy the customer many types of products one-time order. If you need custom any metal parts or plastic parts, pls feel free to contact us for a quote.

Spletišče Ogled vseh izdelkov
YALÇIN BORU GEOTHERMAL

Turčija

YALÇIN BORU GEOTHERMAL has established in Polatlı Organised Industrial Zone in Turkey on an area of 23, 000 m² in 1997. We are the leading firm in the pre-insulated bonded pipes was produced and designed from -200 C to +315 C. We operate by using the technology that is the requirement of the era at the utmost levels, following the manufacturing standards EN 253, EN 448, EN 15632, and EN 12201-2 with its expert staff in their field. We mainly provide services in geothermal energy and many sectors, such as district heating and cooling, energy generation, construction, greenhouse cultivation, tourism, and maritime, by prioritizing quality and customer satisfaction principles and participating in many significant domestic and international projects. We also succeeded in holding customer satisfaction to the maximum level with technical support and service given before and after the selling process. We have an extensive portfolio of products such as: •Standard Type Pre-Insulated Pipes and fittings industrial Type (rock wool reinforced) pre-insulated Pipe and fittings, •Pre-insulated Flexible Plastic Pipes (PP-R, HDPE, PE-X) and fittings, •Steel pipes, Polyethylene Pipes and fittings…. Our production follows international quality management standards such as s ISO 9001, ISO 14001, and ISO 45001. Please contact us for more information ! Thank you.

Spletišče
AZ INTEC GMBH

Nemčija

AZ INTEC GmbH – your certified partner since 1979. We are a family business focused on production, development and OEM. We offer a full range of products and solutions for a multitude of applications. You can get all the parts individually or in customized plug & play assemblies which are ready for your production line. Products: • Shut-off and control valves• Fittings and valves• Pre-assembled hoses made of elastomer (rubber and plastic)• Stainless steel corrugated pipes and hoses• Pre-insulated solar hoses• CATS® – assembly system• Other assembly systems. Media: • Fuel gas• Technical gases• Oxygen• Drinking water. You can find our products and assemblies in use in: • Heat exchangers• Medical applications• Respiratory protection• Renewable energy• Solar panels• Heating and cooling applications• HVAC• District heating• Automotive industry• Building services engineering• Chemical industry• Trace heating• Security technology• Domestic installations (water and gas) – CATS® self-assembly system

Spletišče
CTRA

Tunizija

For 25 years, CTRA has been a reliable partner accompanying its clients in all their projects. A team with specialist skills in processing FRP composites and thermoplastics. Its long track record is your guarantee of technical reliability with high quality, characteristics that go hand-in-hand with loyalty to our clients. CTRA has been certified to the ISO 9001 standard since 2000 and it excels in turnkey projects, from initial designs to commissioning and handover. Our business covers a wide range of activities and services: -Designs for pipework systems, -Detailed designs for supports, reservoirs, scrubber towers, -Fabrication of standard or custom piece on demand, -Prefabrication of pipework systems, -Fabrication of various scrubber towers up to metres in diameter. With its experienced team, CTRA is expert in: the transformation of thermo-hardening materials: •Resin / Matrix, •Liner, •Mechanical strength. The transformation of thermoplastic materials: •PE, •PP, •PVC, •PVDF, ECTFE, PFA.

Vsi izdelki za "plastic pipes"

Cevi in fitingi iz GRP

Korozivne cevi za tekočine

Spletišče Ogled vseh izdelkov
CENTROPLAST ENGINEERING PLASTICS GMBH

Nemčija

With our plastics, we want to make your life easier! Our aim is continuous improvement. We call this approach “Advance”. This is embodied by Centroplast Advance: Redefining diversity and availability. Making your visions a reality in plastic. Making the order process simpler and more transparent. To achieve these goals, our team of specialised staff are on hand to help you. We have also developed an online portal where you yourself can find the products that meet your individual requirements, quickly and easily. AdvanceDock: Our online portal for an optimum information and order process. Take advantage of the Advance principle! We would be delighted if you want to work with Centroplast. To learn more about our company, simply scroll down.

Spletišče
JEDI KUNSTSTOFFTECHNIK GMBH

Nemčija

The JEDI Kunststofftechnik GmbH is one of the leading international manufacturers of soft PVC rolls, panels and sheeting as well as strip curtains of various widths. The recipe to JEDI Kunststofftechnik GmbH's success rests on our fundamental company philosophy which is a consistently customer-oriented business strategy, encompassing both conception and production as well as a comprehensive service. Each of our customers wants spot-on realisation of their individual wishes and these wishes are the fundamental guidelines to each work process. Only in this way can total customer satisfaction be achieved; a goal which is our top priority in any job.

Spletišče
KUNSTSTOFFTECHNIK WEISSBACH GMBH

Nemčija

Our family company has been producing tailor-made plastic solutions since 1991. We now employ 55 people in Gornau, a municipality close to Chemnitz in eastern Germany, in the areas of semi-finished product processing, container and apparatus construction, plant construction and clean room technology. Our solutions are used in sectors such as mechanical engineering and plant construction, medical and environmental technology, the semiconductor industry and photovoltaics. Our company is certified in accordance with ISO 9001: 2008, which demonstrates the high quality of our products and services.

Spletišče
CONSTAB POLYOLEFIN ADDITIVES GMBH

Nemčija

Since 1971, we develop and produce masterbatches and compounds for polyolefins and are one of the leading partners in the plastics processing industry. CONSTAB is one of the market leaders in the production of masterbatches for biaxially oriented polypropylene (BOPP) films. We offer masterbatch solutions that are used for the production of high-quality end products in various applications like packaging films (BOPP, BOPE, CPP, PE), polycarbonate sheets, agricultural films and derivatives, biopolymer and flame retardant applications, pipes, fibers, nonwovens, extrusion blow molding, injection molding and much more. Our masterbatches are applied all over the world. Since 2003 we belong to the Kafrit Group.

Spletišče
GRÜNING & LOSKE GMBH

Nemčija

Grüning & Loske GmbH stands for a successful combination of products and services. Good ideas, the latest technology and many years of tradition as a technical trader, we add to innovative solutions which all have just one objective: The optimisation of your procurement process. This also includes outsourcing concepts with C-Parts management and standardisation measures for industry and trade, along with the creation of rationalisation concepts in the scheduling and logistics sector. You can rely on our awareness of responsibility and quality – from the initial conversation through to on-time delivery. Our vision: We want to be the service leader in day-to-day activities; we want to be the most customer-oriented team in technical trade; we want to be the most competent contact for our customers; we want to achieve maximum economic success with our activities for our customers and for Grüning & Loske.

Spletišče
HUGO ARENS GMBH & CO. KG

Nemčija

We are experts in the development and production of cast aluminium parts. Our Arens tubular fittings are highly versatile and have set new standards in quality and design. Our RoHS and REACH compliant products are manufactured in Iserlohn, Germany, with an in-house quality management system in place. Our customers include leading businesses from the most varied of industries worldwide. We are also happy to develop individual solutions and custom products for you. Simple assembly in no time. The Arens tubular fittings are easily installed without the need for welding or special tools to create railings for machinery or work platforms, for instance, or as hand rails and poles in buses and trains. Our products provide support. We manufacture all our products using high-quality DIN-standard aluminium alloys which provide maximum stability and resistant to corrosion while remaining lightweight.

Spletišče